lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 18/21] drm/mediatek: Add mt8195 Embedded DisplayPort driver
From
Date
On Wed, 2022-06-08 at 10:44 +0800, CK Hu wrote:
> Hi, Rex:
>
> On Tue, 2022-06-07 at 20:44 +0800, Rex-BC Chen wrote:
> > On Tue, 2022-06-07 at 14:44 +0800, CK Hu wrote:
> > > Hi, Rex:
> > >
> > > On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> > > > From: Markus Schneider-Pargmann <msp@baylibre.com>
> > > >
> > > > This patch adds a DisplayPort driver for the Mediatek mt8195
> > > > SoC.
> > > >
> > > > It supports the mt8195, the embedded DisplayPort units. It
> > > > offers
> > > > DisplayPort 1.4 with up to 4 lanes.
> > > >
> > > > The driver creates a child device for the phy. The child device
> > > > will
> > > > never exist without the parent being active. As they are
> > > > sharing
> > > > a
> > > > register range, the parent passes a regmap pointer to the child
> > > > so
> > > > that
> > > > both can work with the same register range. The phy driver sets
> > > > device
> > > > data that is read by the parent to get the phy device that can
> > > > be
> > > > used
> > > > to control the phy properties.
> > > >
> > > > This driver is based on an initial version by
> > > > Jason-JH.Lin <jason-jh.lin@mediatek.com>.
> > > >
> > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > > > ---
> > >
> > > [snip]
> > >
> > > > +
> > > > +static int mtk_dp_train_handler(struct mtk_dp *mtk_dp)
> > > > +{
> > > > + bool training_done = false;
> > > > + short max_retry = 50;
> > > > + int ret = 0;
> > > > +
> > > > + do {
> > > > + switch (mtk_dp->train_state) {
> > > > + case MTK_DP_TRAIN_STATE_STARTUP:
> > >
> > > mtk_dp->train_state is initialized as MTK_DP_TRAIN_STATE_STARTUP
> > > even
> > > though HPD ISR does not exist. Does this mean HPD ISR is
> > > redundant?
> > > If
> > > HPD ISR is not redundant, create a new state
> > > MTK_DP_TRAIN_STATE_NONE
> > > for init state.
> > >
> >
> > Hello CK,
> >
> > I think we don't need MTK_DP_TRAIN_STATE_NONE.
> > Because it's "DP_TRAIN_STATE" not "DP_STATE", I think it's ok if we
> > start this state machine with "MTK_DP_TRAIN_STATE_STARTUP".
>
> The initial state is MTK_DP_TRAIN_STATE_STARTUP, and HPD thread would
> change state from MTK_DP_TRAIN_STATE_STARTUP to
> MTK_DP_TRAIN_STATE_STARTUP, this is redundant. So drop the state
> change
> in HPD thread.
>

ok, in edp it's redundant in mtk_dp_hpd_event_thread(), but I will add
it back in dp patch.

> >
> > > > + mtk_dp_state_handler(mtk_dp);
> > > > + mtk_dp->train_state =
> > > > MTK_DP_TRAIN_STATE_CHECKCAP;
> > > > + break;
> > > > +
> > > > + case MTK_DP_TRAIN_STATE_CHECKCAP:
> > > > + if (mtk_dp_parse_capabilities(mtk_dp))
> > > > {
> > > > + mtk_dp-
> > > > >train_info.check_cap_count = 0;
> > > > + mtk_dp->train_state =
> > > > MTK_DP_TRAIN_STATE_CHECKEDID;
> > > > + } else {
> > > > + mtk_dp-
> > > > >train_info.check_cap_count++;
> > > > +
> > > > + if (mtk_dp-
> > > > >train_info.check_cap_count
> > > > >
> > > >
> > > > + MTK_DP_CHECK_SINK_CAP_TIMEO
> > > > UT_COUNT
> > > > ) {
> > > > + mtk_dp-
> > > > > train_info.check_cap_count = 0;
> > > >
> > > > + mtk_dp->train_state =
> > > > MTK_DP_TRAIN_STATE_DPIDLE;
> > > > + ret = -ETIMEDOUT;
> > > > + }
> > > > + }
> > > > + break;
> > > > +
> > > > + case MTK_DP_TRAIN_STATE_CHECKEDID:
> > > > + mtk_dp->train_state =
> > > > MTK_DP_TRAIN_STATE_TRAINING_PRE;
> > >
> > > MTK_DP_TRAIN_STATE_CHECKEDID is a redundant state, drop it.
> > >
> > > > + break;
> > > > +
> > > > + case MTK_DP_TRAIN_STATE_TRAINING_PRE:
> > > > + mtk_dp_state_handler(mtk_dp);
> > > > + mtk_dp->train_state =
> > > > MTK_DP_TRAIN_STATE_TRAINING;
> > > > + break;
> > > > +
> > > > + case MTK_DP_TRAIN_STATE_TRAINING:
> > > > + ret = mtk_dp_train_start(mtk_dp);
> > > > + if (ret == 0) {
> > > > + mtk_dp_video_mute(mtk_dp,
> > > > true);
> > > > + mtk_dp->train_state =
> > > > MTK_DP_TRAIN_STATE_NORMAL;
> > > > + mtk_dp_fec_enable(mtk_dp,
> > > > mtk_dp-
> > > > > has_fec);
> > > >
> > > > + } else if (ret != -EAGAIN) {
> > > > + mtk_dp->train_state =
> > > > MTK_DP_TRAIN_STATE_DPIDLE;
> > > > + }
> > > > + break;
> > > > + case MTK_DP_TRAIN_STATE_NORMAL:
> > > > + mtk_dp_state_handler(mtk_dp);
> > > > + training_done = true;
> > > > + break;
> > > > + case MTK_DP_TRAIN_STATE_DPIDLE:
> > >
> > > When would this case happen?
> > >
> > > Regards,
> > > CK
> >
> > Yes, if it's disconnected if we are still training for dp.
> > or failed to training min spec RBR.
>
> I mean, every time state change to MTK_DP_TRAIN_STATE_DPIDLE, it
> would
> jump out of this loop and would not get into this loop, so this case
> would never get in. This is redundant, so remove this.
>
> Regards,
> CK
>

ok, I will remove it

BRs,
Bo-Chen

> >
> > BRs,
> > Rex
> > >
> > > > + break;
> > > > + default:
> > > > + break;
> > > > + }
> > > > +
> > > > + if (ret) {
> > > > + if (ret == -EAGAIN)
> > > > + continue;
> > > > + /*
> > > > + * If we get any other error number, it
> > > > doesn't
> > > > + * make any sense to keep iterating.
> > > > + */
> > > > + break;
> > > > + }
> > > > + } while (!training_done || --max_retry);
> > > > +
> > > > + return ret;
> > > > +}
> > >
> > >
> >
> >
>
>

\
 
 \ /
  Last update: 2022-06-08 14:55    [W:1.327 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site