lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: thermal: qcom,spmi-temp-alarm: convert to dtschema
Date
Convert the Qualcomm QPNP PMIC Temperature Alarm to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../thermal/qcom,spmi-temp-alarm.yaml | 85 +++++++++++++++++++
.../bindings/thermal/qcom-spmi-temp-alarm.txt | 51 -----------
2 files changed, 85 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
delete mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt

diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
new file mode 100644
index 000000000000..5f08b6e59b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPNP PMIC Temperature Alarm
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
+ that utilize the Qualcomm SPMI implementation. These peripherals provide an
+ interrupt signal and status register to identify high PMIC die temperature.
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ const: qcom,spmi-temp-alarm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ io-channels:
+ items:
+ - description: ADC channel, which reports chip die temperature
+
+ io-channel-names:
+ items:
+ - const: thermal
+
+ '#thermal-sensor-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8350_temp_alarm: temperature-sensor@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
+ thermal-zones {
+ pm8350_thermal: pm8350c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8350_temp_alarm>;
+
+ trips {
+ pm8350_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm8350_crit: pm8350c-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
deleted file mode 100644
index 2d5b2ad03314..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm QPNP PMIC Temperature Alarm
-
-QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
-that utilize the Qualcomm SPMI implementation. These peripherals provide an
-interrupt signal and status register to identify high PMIC die temperature.
-
-Required properties:
-- compatible: Should contain "qcom,spmi-temp-alarm".
-- reg: Specifies the SPMI address.
-- interrupts: PMIC temperature alarm interrupt.
-- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- io-channels: Should contain IIO channel specifier for the ADC channel,
- which report chip die temperature.
-- io-channel-names: Should contain "thermal".
-
-Example:
-
- pm8941_temp: thermal-alarm@2400 {
- compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400>;
- interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
- #thermal-sensor-cells = <0>;
-
- io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
- io-channel-names = "thermal";
- };
-
- thermal-zones {
- pm8941 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&pm8941_temp>;
-
- trips {
- stage1 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- stage2 {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
--
2.34.1
\
 
 \ /
  Last update: 2022-06-08 13:32    [W:0.126 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site