lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 0/2] Introduce MediaTek CCI devfreq driver
From
Date
On 6/7/22 11:05 PM, Johnson Wang wrote:
> The Cache Coherent Interconnect (CCI) is the management of cache
> coherency by hardware. CCI DEVFREQ is DVFS driver for power saving by
> scaling clock frequency and supply voltage of CCI. CCI uses the same
> input clock source and power rail as LITTLE CPUs on Mediatek SoCs.
>
> This series depends on:
> Chanwoo's repo: kernel/git/chanwoo/linux.git
> branch: devfreq-testing
> [1]: PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
> [2]: PM / devfreq: Add cpu based scaling support to passive governor
> [3]: PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
> [4]: PM / devfreq: passive: Update frequency when start governor
>
> Changes in v7:
> - remove the 'ret' printing from dev_err_probe().
>
> Changes in v6:
> - Remove unnecessary "goto" statement.
>
> Changes in v5:
> - Modify some binding description.
> - Remove pre_voltage member.
> - Not to enable/disable intermediate clock.
> - Not to "put" resources that using devm_ variants.
>
> Resend v4:
> - CC interconnect maintainer.
> - Change sign-off sequence in commit message.
>
> Changes in v4:
> - Add a maintainer in the binding document.
> - Modify clock description.
> - Add binding document into MAINTAINERS.
> - Replace format specifier %d with %ld.
>
> Changes in v3:
> - Move binding document to 'interconnect' and rename it.
> - Add COMPILE_TEST dependence symbol.
> - Remove need_voltage_tracking variable.
> - Move mtk_ccifreq_voltage_tracking() code into mtk_ccifreq_set_voltage().
> - Add an interation limit in the while() loop.
> - Replace 'cci_dev' with 'dev'
> - Replace old_* with pre_*
> - Remove of_match_ptr()
> - Use module_platform_driver()
>
> Changes in v2:
> - Take MT8183 as example in binding document.
> - Use dev_err() instead of pr_err().
> - Use 'goto' statement to handle error case.
> - Clean up driver code.
>
> Johnson Wang (2):
> dt-bindings: interconnect: Add MediaTek CCI dt-bindings
> PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
>
> .../bindings/interconnect/mediatek,cci.yaml | 140 ++++++
> MAINTAINERS | 1 +
> drivers/devfreq/Kconfig | 10 +
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/mtk-cci-devfreq.c | 474 ++++++++++++++++++
> 5 files changed, 626 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
> create mode 100644 drivers/devfreq/mtk-cci-devfreq.c
>

Applied them. Thanks.

--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2022-06-08 07:09    [W:0.319 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site