lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v16 2/3] fpga: microchip-spi: add Microchip MPF FPGA manager
Date
On 08/06/2022 10:20, Xu Yilun wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On Tue, Jun 07, 2022 at 02:10:29PM +0300, Ivan Bornyakov wrote:
>> Add support to the FPGA manager for programming Microchip Polarfire
>> FPGAs over slave SPI interface with .dat formatted bitsream image.
>>
>> Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>> Tested-by: Conor Dooley <conor.dooley@microchip.com>
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>

Signed-off-by ?

>
>> ---
>> drivers/fpga/Kconfig | 9 +
>> drivers/fpga/Makefile | 1 +
>> drivers/fpga/microchip-spi.c | 393 +++++++++++++++++++++++++++++++++++
>> 3 files changed, 403 insertions(+)
>> create mode 100644 drivers/fpga/microchip-spi.c
>>
>> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
>> index 26025dbab353..75806ef5c9ea 100644
>> --- a/drivers/fpga/Kconfig
>> +++ b/drivers/fpga/Kconfig
>> @@ -248,4 +248,13 @@ config FPGA_MGR_VERSAL_FPGA
>> configure the programmable logic(PL).
>>
>> To compile this as a module, choose M here.
>> +
>> +config FPGA_MGR_MICROCHIP_SPI
>> + tristate "Microchip Polarfire SPI FPGA manager"
>> + depends on SPI
>> + help
>> + FPGA manager driver support for Microchip Polarfire FPGAs
>> + programming over slave SPI interface with .dat formatted
>> + bitstream image.
>> +
>> endif # FPGA
>> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
>> index e32bfa90f968..5425a15892df 100644
>> --- a/drivers/fpga/Makefile
>> +++ b/drivers/fpga/Makefile
>> @@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
>> obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
>> obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
>> obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o
>> +obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI) += microchip-spi.o
>> obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o
>> obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o
>>
>> diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c
>> new file mode 100644
>> index 000000000000..2d1b73fe0b65
>> --- /dev/null
>> +++ b/drivers/fpga/microchip-spi.c
>> @@ -0,0 +1,393 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Microchip Polarfire FPGA programming over slave SPI interface.
>> + */
>> +
>> +#include <asm/unaligned.h>
>> +#include <linux/delay.h>
>> +#include <linux/fpga/fpga-mgr.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/spi/spi.h>
>> +
>> +#define MPF_SPI_ISC_ENABLE 0x0B
>> +#define MPF_SPI_ISC_DISABLE 0x0C
>> +#define MPF_SPI_READ_STATUS 0x00
>> +#define MPF_SPI_READ_DATA 0x01
>> +#define MPF_SPI_FRAME_INIT 0xAE
>> +#define MPF_SPI_FRAME 0xEE
>> +#define MPF_SPI_PRG_MODE 0x01
>> +#define MPF_SPI_RELEASE 0x23
>> +
>> +#define MPF_SPI_FRAME_SIZE 16
>> +
>> +#define MPF_HEADER_SIZE_OFFSET 24
>> +#define MPF_DATA_SIZE_OFFSET 55
>> +
>> +#define MPF_LOOKUP_TABLE_RECORD_SIZE 9
>> +#define MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET 0
>> +#define MPF_LOOKUP_TABLE_BLOCK_START_OFFSET 1
>> +
>> +#define MPF_COMPONENTS_SIZE_ID 5
>> +#define MPF_BITSTREAM_ID 8
>> +
>> +#define MPF_BITS_PER_COMPONENT_SIZE 22
>> +
>> +#define MPF_STATUS_POLL_RETRIES 10000
>> +#define MPF_STATUS_BUSY BIT(0)
>> +#define MPF_STATUS_READY BIT(1)
>> +#define MPF_STATUS_SPI_VIOLATION BIT(2)
>> +#define MPF_STATUS_SPI_ERROR BIT(3)
>> +
>> +struct mpf_priv {
>> + struct spi_device *spi;
>> + bool program_mode;
>> +};
>> +
>> +static int mpf_read_status(struct spi_device *spi)
>> +{
>> + u8 status = 0, status_command = MPF_SPI_READ_STATUS;
>> + struct spi_transfer xfers[2] = { 0 };
>> + int ret;
>> +
>> + /*
>> + * HW status is returned on MISO in the first byte after CS went
>> + * active. However, first reading can be inadequate, so we submit
>> + * two identical SPI transfers and use result of the later one.
>> + */
>> + xfers[0].tx_buf = xfers[1].tx_buf = &status_command;
>> + xfers[0].rx_buf = xfers[1].rx_buf = &status;
>> + xfers[0].len = xfers[1].len = 1;
>> + xfers[0].cs_change = 1;
>> +
>> + ret = spi_sync_transfer(spi, xfers, 2);
>> +
>> + if ((status & MPF_STATUS_SPI_VIOLATION) ||
>> + (status & MPF_STATUS_SPI_ERROR))
>> + ret = -EIO;
>> +
>> + return ret ? : status;
>> +}
>> +
>> +static enum fpga_mgr_states mpf_ops_state(struct fpga_manager *mgr)
>> +{
>> + struct mpf_priv *priv = mgr->priv;
>> + struct spi_device *spi;
>> + bool program_mode;
>> + int status;
>> +
>> + spi = priv->spi;
>> + program_mode = priv->program_mode;
>> + status = mpf_read_status(spi);
>> +
>> + if (!program_mode && !status)
>> + return FPGA_MGR_STATE_OPERATING;
>> +
>> + return FPGA_MGR_STATE_UNKNOWN;
>> +}
>> +
>> +static int mpf_ops_parse_header(struct fpga_manager *mgr,
>> + struct fpga_image_info *info,
>> + const char *buf, size_t count)
>> +{
>> + size_t component_size_byte_num, component_size_byte_off,
>> + components_size_start, bitstream_start,
>> + block_id_offset, block_start_offset;
>> + u8 header_size, blocks_num, block_id;
>> + u32 block_start, component_size;
>> + u16 components_num, i;
>> +
>> + if (!buf) {
>> + dev_err(&mgr->dev, "Image buffer is not provided\n");
>> + return -EINVAL;
>> + }
>> +
>> + header_size = *(buf + MPF_HEADER_SIZE_OFFSET);
>> + if (header_size > count) {
>> + info->header_size = header_size;
>> + return -EAGAIN;
>> + }
>> +
>> + /*
>> + * Go through look-up table to find out where actual bitstream starts
>> + * and where sizes of components of the bitstream lies.
>> + */
>> + blocks_num = *(buf + header_size - 1);
>> + block_id_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET;
>> + block_start_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_START_OFFSET;
>> +
>> + header_size += blocks_num * MPF_LOOKUP_TABLE_RECORD_SIZE;
>> + if (header_size > count) {
>> + info->header_size = header_size;
>> + return -EAGAIN;
>> + }
>> +
>> + components_size_start = 0;
>> + bitstream_start = 0;
>> +
>> + while (blocks_num--) {
>> + block_id = *(buf + block_id_offset);
>> + block_start = get_unaligned_le32(buf + block_start_offset);
>> +
>> + switch (block_id) {
>> + case MPF_BITSTREAM_ID:
>> + info->header_size = bitstream_start = block_start;
>> + if (block_start > count)
>> + return -EAGAIN;
>> +
>> + break;
>> + case MPF_COMPONENTS_SIZE_ID:
>> + components_size_start = block_start;
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + if (bitstream_start && components_size_start)
>> + break;
>> +
>> + block_id_offset += MPF_LOOKUP_TABLE_RECORD_SIZE;
>> + block_start_offset += MPF_LOOKUP_TABLE_RECORD_SIZE;
>> + }
>> +
>> + if (!bitstream_start || !components_size_start) {
>> + dev_err(&mgr->dev, "Failed to parse header look-up table\n");
>> + return -EFAULT;
>> + }
>> +
>> + /*
>> + * Parse bitstream size.
>> + * Sizes of components of the bitstream are 22-bits long placed next
>> + * to each other. Image header should be extended by now up to where
>> + * actual bitstream starts, so no need for overflow check anymore.
>> + */
>> + components_num = get_unaligned_le16(buf + MPF_DATA_SIZE_OFFSET);
>> +
>> + for (i = 0; i < components_num; i++) {
>> + component_size_byte_num =
>> + (i * MPF_BITS_PER_COMPONENT_SIZE) / BITS_PER_BYTE;
>> + component_size_byte_off =
>> + (i * MPF_BITS_PER_COMPONENT_SIZE) % BITS_PER_BYTE;
>> +
>> + component_size = get_unaligned_le32(buf +
>> + components_size_start +
>> + component_size_byte_num);
>> + component_size >>= component_size_byte_off;
>> + component_size &= GENMASK(MPF_BITS_PER_COMPONENT_SIZE - 1, 0);
>> +
>> + info->data_size += component_size * MPF_SPI_FRAME_SIZE;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/* Poll HW status until busy bit is cleared and mask bits are set. */
>> +static int mpf_poll_status(struct spi_device *spi, u8 mask)
>> +{
>> + int status, retries = MPF_STATUS_POLL_RETRIES;
>> +
>> + while (retries--) {
>> + status = mpf_read_status(spi);
>> + if (status < 0)
>> + return status;
>> +
>> + if (status & MPF_STATUS_BUSY)
>> + continue;
>> +
>> + if (!mask || (status & mask))
>> + return status;
>> + }
>> +
>> + return -EBUSY;
>> +}
>> +
>> +static int mpf_spi_write(struct spi_device *spi, const void *buf, size_t buf_size)
>> +{
>> + int status = mpf_poll_status(spi, 0);
>> +
>> + if (status < 0)
>> + return status;
>> +
>> + return spi_write(spi, buf, buf_size);
>> +}
>> +
>> +static int mpf_spi_write_then_read(struct spi_device *spi,
>> + const void *txbuf, size_t txbuf_size,
>> + void *rxbuf, size_t rxbuf_size)
>> +{
>> + const u8 read_command[] = { MPF_SPI_READ_DATA };
>> + int ret;
>> +
>> + ret = mpf_spi_write(spi, txbuf, txbuf_size);
>> + if (ret)
>> + return ret;
>> +
>> + ret = mpf_poll_status(spi, MPF_STATUS_READY);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return spi_write_then_read(spi, read_command, sizeof(read_command),
>> + rxbuf, rxbuf_size);
>> +}
>> +
>> +static int mpf_ops_write_init(struct fpga_manager *mgr,
>> + struct fpga_image_info *info, const char *buf,
>> + size_t count)
>> +{
>> + const u8 program_mode[] = { MPF_SPI_FRAME_INIT, MPF_SPI_PRG_MODE };
>> + const u8 isc_en_command[] = { MPF_SPI_ISC_ENABLE };
>> + struct mpf_priv *priv = mgr->priv;
>> + struct device *dev = &mgr->dev;
>> + struct spi_device *spi;
>> + u32 isc_ret = 0;
>> + int ret;
>> +
>> + if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
>> + dev_err(dev, "Partial reconfiguration is not supported\n");
>> + return -EOPNOTSUPP;
>> + }
>> +
>> + spi = priv->spi;
>> +
>> + ret = mpf_spi_write_then_read(spi, isc_en_command, sizeof(isc_en_command),
>> + &isc_ret, sizeof(isc_ret));
>> + if (ret || isc_ret) {
>> + dev_err(dev, "Failed to enable ISC: spi_ret %d, isc_ret %u\n",
>> + ret, isc_ret);
>> + return -EFAULT;
>> + }
>> +
>> + ret = mpf_spi_write(spi, program_mode, sizeof(program_mode));
>> + if (ret) {
>> + dev_err(dev, "Failed to enter program mode: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + priv->program_mode = true;
>> +
>> + return 0;
>> +}
>> +
>> +static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count)
>> +{
>> + u8 spi_frame_command[] = { MPF_SPI_FRAME };
>> + struct spi_transfer xfers[2] = { 0 };
>> + struct mpf_priv *priv = mgr->priv;
>> + struct device *dev = &mgr->dev;
>> + struct spi_device *spi;
>> + int ret, i;
>> +
>> + if (count % MPF_SPI_FRAME_SIZE) {
>> + dev_err(dev, "Bitstream size is not a multiple of %d\n",
>> + MPF_SPI_FRAME_SIZE);
>> + return -EINVAL;
>> + }
>> +
>> + spi = priv->spi;
>> +
>> + xfers[0].tx_buf = spi_frame_command;
>> + xfers[0].len = sizeof(spi_frame_command);
>> +
>> + for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) {
>> + xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE;
>> + xfers[1].len = MPF_SPI_FRAME_SIZE;
>> +
>> + ret = mpf_poll_status(spi, 0);
>> + if (ret >= 0)
>> + ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers));
>> +
>> + if (ret) {
>> + dev_err(dev, "Failed to write bitstream frame %d/%zu\n",
>> + i, count / MPF_SPI_FRAME_SIZE);
>> + return ret;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int mpf_ops_write_complete(struct fpga_manager *mgr,
>> + struct fpga_image_info *info)
>> +{
>> + const u8 isc_dis_command[] = { MPF_SPI_ISC_DISABLE };
>> + const u8 release_command[] = { MPF_SPI_RELEASE };
>> + struct mpf_priv *priv = mgr->priv;
>> + struct device *dev = &mgr->dev;
>> + struct spi_device *spi;
>> + int ret;
>> +
>> + spi = priv->spi;
>> +
>> + ret = mpf_spi_write(spi, isc_dis_command, sizeof(isc_dis_command));
>> + if (ret) {
>> + dev_err(dev, "Failed to disable ISC: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + usleep_range(1000, 2000);
>> +
>> + ret = mpf_spi_write(spi, release_command, sizeof(release_command));
>> + if (ret) {
>> + dev_err(dev, "Failed to exit program mode: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + priv->program_mode = false;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct fpga_manager_ops mpf_ops = {
>> + .state = mpf_ops_state,
>> + .initial_header_size = 71,
>> + .parse_header = mpf_ops_parse_header,
>> + .write_init = mpf_ops_write_init,
>> + .write = mpf_ops_write,
>> + .write_complete = mpf_ops_write_complete,
>> +};
>> +
>> +static int mpf_probe(struct spi_device *spi)
>> +{
>> + struct device *dev = &spi->dev;
>> + struct fpga_manager *mgr;
>> + struct mpf_priv *priv;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + priv->spi = spi;
>> +
>> + mgr = devm_fpga_mgr_register(dev, "Microchip Polarfire SPI FPGA Manager",
>> + &mpf_ops, priv);
>> +
>> + return PTR_ERR_OR_ZERO(mgr);
>> +}
>> +
>> +static const struct spi_device_id mpf_spi_ids[] = {
>> + { .name = "mpf-spi-fpga-mgr", },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(spi, mpf_spi_ids);
>> +
>> +#if IS_ENABLED(CONFIG_OF)
>> +static const struct of_device_id mpf_of_ids[] = {
>> + { .compatible = "microchip,mpf-spi-fpga-mgr" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, mpf_of_ids);
>> +#endif /* IS_ENABLED(CONFIG_OF) */
>> +
>> +static struct spi_driver mpf_driver = {
>> + .probe = mpf_probe,
>> + .id_table = mpf_spi_ids,
>> + .driver = {
>> + .name = "microchip_mpf_spi_fpga_mgr",
>> + .of_match_table = of_match_ptr(mpf_of_ids),
>> + },
>> +};
>> +
>> +module_spi_driver(mpf_driver);
>> +
>> +MODULE_DESCRIPTION("Microchip Polarfire SPI FPGA Manager");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.35.1
>>

\
 
 \ /
  Last update: 2022-06-08 12:01    [W:0.067 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site