lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: backlight: rt4831: Add the new ocp level property
From
On 08/06/2022 10:41, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
>
> Add 'richtek,bled-ocp-microamp' property to make it chooseable.
>
> The wrong backlight ocp level may affect the backlight channel output
> current smaller than configured.
>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> Since v2:
> - Change the property name from 'richtek,bled-ocp-sel' to 'richtek,bled-ocp-microamp'.
>
> ---
> .../devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> index e0ac686..0f4beeb 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> @@ -47,6 +47,11 @@ properties:
> minimum: 0
> maximum: 3
>
> + richtek,bled-ocp-microamp:
> + description: |
> + Backlight over current protection level, unit in microamp.

Skip last part. Unit comes from property name.

> The current
> + supported level is 0.9A/1.2A/1.5A/1.8A.

Define here enum instead of this text.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-08 11:46    [W:0.041 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site