lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 3/3] mfd: atmel-flexcom: Add support for lan966x flexcom chip-select configuration
Date
On 07.06.2022 17:47, Kavyasree Kotagiri wrote:
> LAN966x SoC have 5 flexcoms. Each flexcom has 2 chip-selects.
> For each chip select of each flexcom there is a configuration
> register FLEXCOM_SHARED[0-4]:SS_MASK[0-1]. The width of
> configuration register is 21 because there are 21 shared pins
> on each of which the chip select can be mapped. Each bit of the
> register represents a different FLEXCOM_SHARED pin.
>
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> ---
> v1 -> v2:
> - use GENMASK for mask, macros for maximum allowed values.
> - use u32 values for flexcom chipselects instead of strings.
> - disable clock in case of errors.
>
> drivers/mfd/atmel-flexcom.c | 93 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 92 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
> index 33caa4fba6af..ac700a85b46f 100644
> --- a/drivers/mfd/atmel-flexcom.c
> +++ b/drivers/mfd/atmel-flexcom.c
> @@ -28,15 +28,68 @@
> #define FLEX_MR_OPMODE(opmode) (((opmode) << FLEX_MR_OPMODE_OFFSET) & \
> FLEX_MR_OPMODE_MASK)
>
> +/* LAN966x flexcom shared register offsets */
> +#define FLEX_SHRD_SS_MASK_0 0x0
> +#define FLEX_SHRD_SS_MASK_1 0x4
> +#define FLEX_SHRD_PIN_MAX 20
> +#define FLEX_CS_MAX 1
> +#define FLEX_SHRD_MASK GENMASK(20, 0)
> +
> +struct atmel_flex_caps {
> + bool has_flx_cs;
> +};
> +
> struct atmel_flexcom {
> void __iomem *base;
> + void __iomem *flexcom_shared_base;
> u32 opmode;
> struct clk *clk;
> };
>
> +static int atmel_flexcom_lan966x_cs_config(struct platform_device *pdev)
> +{
> + struct atmel_flexcom *ddata = dev_get_drvdata(&pdev->dev);
> + struct device_node *np = pdev->dev.of_node;
> + u32 flx_shrd_pins[2], flx_cs[2], val;
> + int err, i, count;
> +
> + count = of_property_count_u32_elems(np, "microchip,flx-shrd-pins");
> + if (count <= 0 || count > 2) {
> + dev_err(&pdev->dev, "Invalid %s property (%d)\n", "flx-shrd-pins",
> + count);
> + return -EINVAL;
> + }
> +
> + err = of_property_read_u32_array(np, "microchip,flx-shrd-pins", flx_shrd_pins, count);
> + if (err)
> + return err;
> +
> + err = of_property_read_u32_array(np, "microchip,flx-cs", flx_cs, count);
> + if (err)
> + return err;
> +
> + for (i = 0; i < count; i++) {
> + if (flx_shrd_pins[i] > FLEX_SHRD_PIN_MAX)
> + return -EINVAL;
> +
> + if (flx_cs[i] > FLEX_CS_MAX)
> + return -EINVAL;
> +
> + val = ~(1 << flx_shrd_pins[i]) & FLEX_SHRD_MASK;
> +
> + if (flx_cs[i] == 0)
> + writel(val, ddata->flexcom_shared_base + FLEX_SHRD_SS_MASK_0);
> + else
> + writel(val, ddata->flexcom_shared_base + FLEX_SHRD_SS_MASK_1);

There is still an open question on this topic from previous version.

> + }
> +
> + return 0;
> +}
> +
> static int atmel_flexcom_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> + const struct atmel_flex_caps *caps;
> struct resource *res;
> struct atmel_flexcom *ddata;
> int err;
> @@ -76,13 +129,51 @@ static int atmel_flexcom_probe(struct platform_device *pdev)
> */
> writel(FLEX_MR_OPMODE(ddata->opmode), ddata->base + FLEX_MR);
>
> + caps = of_device_get_match_data(&pdev->dev);
> + if (!caps) {
> + dev_err(&pdev->dev, "Could not retrieve flexcom caps\n");
> + clk_disable_unprepare(ddata->clk);

Could you keep a common path to disable the clock? A goto label something
like this:
ret = -EINVAL;
got clk_disable_unprepare;

> + return -EINVAL;
> + }
> +
> + if (caps->has_flx_cs) {
> + ddata->flexcom_shared_base = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
> + if (IS_ERR(ddata->flexcom_shared_base)) {
> + clk_disable_unprepare(ddata->clk);
> + return dev_err_probe(&pdev->dev,
> + PTR_ERR(ddata->flexcom_shared_base),
> + "failed to get flexcom shared base address\n");
ret = dev_err_probe(...);
goto clk_disable_unprepare;
> + }
> +
> + err = atmel_flexcom_lan966x_cs_config(pdev);
> + if (err) {
> + clk_disable_unprepare(ddata->clk);
> + return err;
goto clk_disable_unprepare;
> + }
> + }
> +

clk_unprepare:
> clk_disable_unprepare(ddata->clk);
if (ret)
return ret;
>
> return devm_of_platform_populate(&pdev->dev);
> }
>
> +static const struct atmel_flex_caps atmel_flexcom_caps = {};
> +
> +static const struct atmel_flex_caps lan966x_flexcom_caps = {
> + .has_flx_cs = true,
> +};
> +
> static const struct of_device_id atmel_flexcom_of_match[] = {
> - { .compatible = "atmel,sama5d2-flexcom" },
> + {
> + .compatible = "atmel,sama5d2-flexcom",
> + .data = &atmel_flexcom_caps,
> + },
> +
> + {
> + .compatible = "microchip,lan966x-flexcom",
> + .data = &lan966x_flexcom_caps,
> + },
> +
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);

\
 
 \ /
  Last update: 2022-06-08 10:07    [W:0.195 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site