lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/3] dt-bindings: mfd: atmel,flexcom: Convert to json-schema
Date
On 07.06.2022 17:47, Kavyasree Kotagiri wrote:
> Convert the Atmel flexcom device tree bindings to json schema.
>
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> ---
> v1 -> v2:
> - Fix title.
>
> .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++
> .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------
> 2 files changed, 97 insertions(+), 63 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> new file mode 100644
> index 000000000000..05cb6ebb4b2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel Flexcom (Flexible Serial Communication Unit)
> +
> +maintainers:
> + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> +
> +description:
> + The Atmel Flexcom is just a wrapper which embeds a SPI controller,
> + an I2C controller and an USART. Only one function can be used at a
> + time and is chosen at boot time according to the device tree.
> +
> +properties:
> + compatible:
> + const: atmel,sama5d2-flexcom
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> + ranges:
> + description:
> + One range for the full I/O register region. (including USART,
> + TWI and SPI registers).
> + items:
> + maxItems: 3
> +
> + atmel,flexcom-mode:
> + description: |
> + Specifies the flexcom mode as follows:
> + 1: USART
> + 2: SPI
> + 3: I2C.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 3]
> +
> +patternProperties:
> + "^serial@[0-9a-f]+$":
> + description: See atmel-usart.txt for details of USART bindings.
> + type: object
> +
> + "^spi@[0-9a-f]+$":
> + description: See ../spi/spi_atmel.txt for details of SPI bindings.
> + type: object
> +
> + "^i2c@[0-9a-f]+$":
> + description: See ../i2c/i2c-at91.txt for details of I2C bindings.
> + type: object
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - "#address-cells"
> + - "#size-cells"
> + - ranges
> + - atmel,flexcom-mode
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + flx0: flexcom@f8034000 {
> + compatible = "atmel,sama5d2-flexcom";
> + reg = <0xf8034000 0x200>;
> + clocks = <&flx0_clk>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8034000 0x800>;
> + atmel,flexcom-mode = <2>;
> +
> + spi0: spi@400 {
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <19 4 7>;

You can still use IRQ_TYPE_LEVEL_HIGH instead of 4 as it was in previous
atmel-flexcom.txt.

> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flx0_default>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&flx0_clk>;
> + clock-names = "spi_clk";
> + atmel,fifo-size = <32>;
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> deleted file mode 100644
> index 9d837535637b..000000000000
> --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> +++ /dev/null
> @@ -1,63 +0,0 @@
> -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
> -
> -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
> -controller and an USART. Only one function can be used at a time and is chosen
> -at boot time according to the device tree.
> -
> -Required properties:
> -- compatible: Should be "atmel,sama5d2-flexcom"
> -- reg: Should be the offset/length value for Flexcom dedicated
> - I/O registers (without USART, TWI or SPI registers).
> -- clocks: Should be the Flexcom peripheral clock from PMC.
> -- #address-cells: Should be <1>
> -- #size-cells: Should be <1>
> -- ranges: Should be one range for the full I/O register region
> - (including USART, TWI and SPI registers).
> -- atmel,flexcom-mode: Should be one of the following values:
> - - <1> for USART
> - - <2> for SPI
> - - <3> for I2C
> -
> -Required child:
> -A single available child device of type matching the "atmel,flexcom-mode"
> -property.
> -
> -The phandle provided by the clocks property of the child is the same as one for
> -the Flexcom parent.
> -
> -For other properties, please refer to the documentations of the respective
> -device:
> -- ../serial/atmel-usart.txt
> -- ../spi/spi_atmel.txt
> -- ../i2c/i2c-at91.txt
> -
> -Example:
> -
> -flexcom@f8034000 {
> - compatible = "atmel,sama5d2-flexcom";
> - reg = <0xf8034000 0x200>;
> - clocks = <&flx0_clk>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0xf8034000 0x800>;
> - atmel,flexcom-mode = <2>;
> -
> - spi@400 {
> - compatible = "atmel,at91rm9200-spi";
> - reg = <0x400 0x200>;
> - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_flx0_default>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - clocks = <&flx0_clk>;
> - clock-names = "spi_clk";
> - atmel,fifo-size = <32>;
> -
> - flash@0 {
> - compatible = "atmel,at25f512b";
> - reg = <0>;
> - spi-max-frequency = <20000000>;
> - };
> - };
> -};

\
 
 \ /
  Last update: 2022-06-08 10:02    [W:0.908 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site