lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V6 0/4] arm64: add i.MX93 support
Date
Hi Shawn,

> Subject: [PATCH V6 0/4] arm64: add i.MX93 support

Is there a chance to get this patchset into your tree?

Thanks,
Peng.
>
> From: Peng Fan <peng.fan@nxp.com>
>
> Sorry for sending several versions in short time, just wanna to catch 5.19
>
> V6:
> Per Fabio's comments, drop unused uart2/uart5 pinmux
>
> V5:
> Add R-b from Aisheng
> drop iomuxc status from board dts
>
> V4:
> Add A-b
> In patch 1 to move imx93 behind imx8ulp Drop a whitespace in patch 2
>
> V3:
> Add a new patch patch 1 for board binding doc Add A-b from Rob Fix dtb
> warnings.
>
> V2:
> Update License
>
> Add i.MX93 dtsi and 11x11 evk board support
>
> The required bindings and drivers has already been in tree.
> There arem checkpatch error for the pin header files as other i.MX pin pin
> header files.
>
>
> Peng Fan (4):
> dt-bindings: arm: fsl: add imx93 11x11 evk board
> arm64: dts: freescale: Add i.MX93 dtsi support
> arm64: dts: freescale: add i.MX93 11x11 EVK basic support
> arm64: defconfig: enable i.MX93 clk & pinctrl
>
> .../devicetree/bindings/arm/fsl.yaml | 6 +
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/imx93-11x11-evk.dts | 114 ++++
> arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623
> ++++++++++++++++++
> arch/arm64/boot/dts/freescale/imx93.dtsi | 334 ++++++++++
> arch/arm64/configs/defconfig | 2 +
> 6 files changed, 1080 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h
> create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi
>
> --
> 2.25.1

\
 
 \ /
  Last update: 2022-06-09 05:39    [W:0.078 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site