lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] Add support for multiport controller
Date
Currently the DWC3 driver supports only single port controller which 
requires at most two PHYs ie HS and SS PHYs. There are SoCs that has
DWC3 controller with multiple ports that can operate in host mode. Some of
the port supports both SS+HS and other port supports only HS mode.

This change refactors the PHY logic to support multiport controller. The
implementation has been tested with Generic PHYs as well.

For any multiport controller we would define a new node "multiport" inside
dwc3 and then add subsequent "mport" nodes inside it for individual ports
that it supports. Now each individual "mport" node defines their own PHYs.

e.g.
Consider a Dual port controller where each port supports HS+SS

multiport {
mp_1: mport1 {
usb-phy = <usb2_phy0>, <usb3_phy0>;
/* Can define Generic PHYs also */
};
mp_2: mport2 {
usb-phy = <usb2_phy1>, <usb3_phy1>;
};

Changes in v3:
Incase any PHY init fails, then clear/exit the PHYs that
are already initialized.

Changes in v2:
Changed dwc3_count_phys to return the number of PHY Phandles in the node.
This will be used now in dwc3_extract_num_phys to increment num_usb2_phy
and num_usb3_phy.
Added new parameter "ss_idx" in dwc3_core_get_phy_ny_node and changed its
structure such that the first half is for HS-PHY and second half is for
SS-PHY.
In dwc3_core_get_phy, for multiport controller, only if SS-PHY phandle is
present, pass proper SS_IDX else pass -1.

Harsh Agarwal (3):
dt-bindings: usb: dwc3: Add support for multiport related properties
usb: phy: Add devm_of_usb_get_phy_by_phandle
usb: dwc3: Refactor PHY logic to support Multiport Controller

.../devicetree/bindings/usb/snps,dwc3.yaml | 53 +++
drivers/usb/dwc3/core.c | 429 +++++++++++++++------
drivers/usb/dwc3/core.h | 12 +-
drivers/usb/dwc3/drd.c | 16 +-
drivers/usb/dwc3/gadget.c | 4 +-
drivers/usb/phy/phy.c | 34 ++
include/linux/usb/phy.h | 8 +
7 files changed, 426 insertions(+), 130 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2022-06-08 19:39    [W:0.078 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site