lkml.org 
[lkml]   [2022]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] um: read multiple msg from virtio slave request fd
Date
If VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is activated, the user mode
linux virtio irq handler only read one msg from the corresponding socket.
This creates issues, when the device emulation creates multiple call
requests (e.g. for multiple virtqueues), as the socket buffer tend to fill
up and the call requests are delayed.

This creates a deadlock situation, when the device simulation blocks,
because of sending a msg and the kernel side blocks because of
synchronously waiting for an acknowledge of kick request.

Actually inband notifications are meant to be used in combination with the
time travel protocol, but it is not required, therefore this corner case
needs to be handled.

Anyways, in general it seems to be more natural to consume always all
messages from a socket, instead of only a single one.

Fixes: 2cd097ba8c05 ("um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ")
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
---
arch/um/drivers/virtio_uml.c | 71 +++++++++++++++++++-----------------
1 file changed, 37 insertions(+), 34 deletions(-)

diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c
index 82ff3785bf69..3716c5f6f9aa 100644
--- a/arch/um/drivers/virtio_uml.c
+++ b/arch/um/drivers/virtio_uml.c
@@ -374,45 +374,48 @@ static irqreturn_t vu_req_read_message(struct virtio_uml_device *vu_dev,
u8 extra_payload[512];
} msg;
int rc;
+ irqreturn_t irq_rc = IRQ_NONE;

- rc = vhost_user_recv_req(vu_dev, &msg.msg,
- sizeof(msg.msg.payload) +
- sizeof(msg.extra_payload));
-
- vu_dev->recv_rc = rc;
- if (rc)
- return IRQ_NONE;
-
- switch (msg.msg.header.request) {
- case VHOST_USER_SLAVE_CONFIG_CHANGE_MSG:
- vu_dev->config_changed_irq = true;
- response = 0;
- break;
- case VHOST_USER_SLAVE_VRING_CALL:
- virtio_device_for_each_vq((&vu_dev->vdev), vq) {
- if (vq->index == msg.msg.payload.vring_state.index) {
- response = 0;
- vu_dev->vq_irq_vq_map |= BIT_ULL(vq->index);
- break;
+ while (1) {
+ rc = vhost_user_recv_req(vu_dev, &msg.msg,
+ sizeof(msg.msg.payload) +
+ sizeof(msg.extra_payload));
+ if (rc)
+ break;
+
+ switch (msg.msg.header.request) {
+ case VHOST_USER_SLAVE_CONFIG_CHANGE_MSG:
+ vu_dev->config_changed_irq = true;
+ response = 0;
+ break;
+ case VHOST_USER_SLAVE_VRING_CALL:
+ virtio_device_for_each_vq((&vu_dev->vdev), vq) {
+ if (vq->index == msg.msg.payload.vring_state.index) {
+ response = 0;
+ vu_dev->vq_irq_vq_map |= BIT_ULL(vq->index);
+ break;
+ }
}
+ break;
+ case VHOST_USER_SLAVE_IOTLB_MSG:
+ /* not supported - VIRTIO_F_ACCESS_PLATFORM */
+ case VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG:
+ /* not supported - VHOST_USER_PROTOCOL_F_HOST_NOTIFIER */
+ default:
+ vu_err(vu_dev, "unexpected slave request %d\n",
+ msg.msg.header.request);
}
- break;
- case VHOST_USER_SLAVE_IOTLB_MSG:
- /* not supported - VIRTIO_F_ACCESS_PLATFORM */
- case VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG:
- /* not supported - VHOST_USER_PROTOCOL_F_HOST_NOTIFIER */
- default:
- vu_err(vu_dev, "unexpected slave request %d\n",
- msg.msg.header.request);
- }
-
- if (ev && !vu_dev->suspended)
- time_travel_add_irq_event(ev);

- if (msg.msg.header.flags & VHOST_USER_FLAG_NEED_REPLY)
- vhost_user_reply(vu_dev, &msg.msg, response);
+ if (ev && !vu_dev->suspended)
+ time_travel_add_irq_event(ev);

- return IRQ_HANDLED;
+ if (msg.msg.header.flags & VHOST_USER_FLAG_NEED_REPLY)
+ vhost_user_reply(vu_dev, &msg.msg, response);
+ irq_rc = IRQ_HANDLED;
+ };
+ /* mask EAGAIN as we try non-blocking read until socket is empty */
+ vu_dev->recv_rc = (rc == -EAGAIN) ? 0 : rc;
+ return irq_rc;
}

static irqreturn_t vu_req_interrupt(int irq, void *data)
--
2.25.1
\
 
 \ /
  Last update: 2022-06-07 13:28    [W:0.060 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site