lkml.org 
[lkml]   [2022]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.18 566/879] ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
    Date
    From: Phil Elwell <phil@raspberrypi.com>

    [ Upstream commit 2c663e5e5bbf2a5b85e0f76ccb69663f583c3e33 ]

    The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT).
    So fix the GPIO line names accordingly.

    Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
    Signed-off-by: Phil Elwell <phil@raspberrypi.com>
    Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
    Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 22 ++++++++++++----------
    1 file changed, 12 insertions(+), 10 deletions(-)

    diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
    index 243236bc1e00..8b043ab62dc8 100644
    --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
    +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
    @@ -74,16 +74,18 @@
    "GPIO27",
    "SDA0",
    "SCL0",
    - "NC", /* GPIO30 */
    - "NC", /* GPIO31 */
    - "NC", /* GPIO32 */
    - "NC", /* GPIO33 */
    - "NC", /* GPIO34 */
    - "NC", /* GPIO35 */
    - "NC", /* GPIO36 */
    - "NC", /* GPIO37 */
    - "NC", /* GPIO38 */
    - "NC", /* GPIO39 */
    + /* Used by BT module */
    + "CTS0",
    + "RTS0",
    + "TXD0",
    + "RXD0",
    + /* Used by Wifi */
    + "SD1_CLK",
    + "SD1_CMD",
    + "SD1_DATA0",
    + "SD1_DATA1",
    + "SD1_DATA2",
    + "SD1_DATA3",
    "CAM_GPIO1", /* GPIO40 */
    "WL_ON", /* GPIO41 */
    "NC", /* GPIO42 */
    --
    2.35.1


    \
     
     \ /
      Last update: 2022-06-08 03:49    [W:2.259 / U:0.048 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site