Messages in this thread Patch in this message | | | From | Krzysztof Kozlowski <> | Subject | [PATCH 03/10] ARM: dts: qcom: ipq4018-ap120c-ac: add function and color to LED nodes | Date | Tue, 7 Jun 2022 12:29:24 +0200 |
| |
Add common LED properties - the function and color - to LED nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts | 6 ++++++ arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts | 7 +++++++ 2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts index 028ac8e24797..cf7da1ab177c 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include <dt-bindings/leds/common.h> #include "qcom-ipq4018-ap120c-ac.dtsi" / { @@ -10,17 +11,22 @@ leds { power { label = "ap120c-ac:green:power"; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "on"; }; wlan { label = "ap120c-ac:green:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; support { label = "ap120c-ac:green:support"; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; panic-indicator; }; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts index b7916fc26d68..c4f89b712fd9 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include <dt-bindings/leds/common.h> #include "qcom-ipq4018-ap120c-ac.dtsi" / { @@ -8,18 +9,24 @@ leds { status: status { label = "ap120c-ac:blue:status"; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "keep"; }; wlan2g { label = "ap120c-ac:green:wlan2g"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { label = "ap120c-ac:red:wlan5g"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_RED>; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; -- 2.34.1
| |