lkml.org 
[lkml]   [2022]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 414/452] serial: pch: dont overwrite xmit->buf[0] by x_char
Date
From: Jiri Slaby <jslaby@suse.cz>

commit d9f3af4fbb1d955bbaf872d9e76502f6e3e803cb upstream.

When x_char is to be sent, the TX path overwrites whatever is in the
circular buffer at offset 0 with x_char and sends it using
pch_uart_hal_write(). I don't understand how this was supposed to work
if xmit->buf[0] already contained some character. It must have been
lost.

Remove this whole pop_tx_x() concept and do the work directly in the
callers. (Without printing anything using dev_dbg().)

Cc: <stable@vger.kernel.org>
Fixes: 3c6a483275f4 (Serial: EG20T: add PCH_UART driver)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/pch_uart.c | 27 +++++++--------------------
1 file changed, 7 insertions(+), 20 deletions(-)

--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -628,22 +628,6 @@ static int push_rx(struct eg20t_port *pr
return 0;
}

-static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
-{
- int ret = 0;
- struct uart_port *port = &priv->port;
-
- if (port->x_char) {
- dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
- __func__, port->x_char, jiffies);
- buf[0] = port->x_char;
- port->x_char = 0;
- ret = 1;
- }
-
- return ret;
-}
-
static int dma_push_rx(struct eg20t_port *priv, int size)
{
int room;
@@ -893,9 +877,10 @@ static unsigned int handle_tx(struct eg2

fifo_size = max(priv->fifo_size, 1);
tx_empty = 1;
- if (pop_tx_x(priv, xmit->buf)) {
- pch_uart_hal_write(priv, xmit->buf, 1);
+ if (port->x_char) {
+ pch_uart_hal_write(priv, &port->x_char, 1);
port->icount.tx++;
+ port->x_char = 0;
tx_empty = 0;
fifo_size--;
}
@@ -950,9 +935,11 @@ static unsigned int dma_handle_tx(struct
}

fifo_size = max(priv->fifo_size, 1);
- if (pop_tx_x(priv, xmit->buf)) {
- pch_uart_hal_write(priv, xmit->buf, 1);
+
+ if (port->x_char) {
+ pch_uart_hal_write(priv, &port->x_char, 1);
port->icount.tx++;
+ port->x_char = 0;
fifo_size--;
}


\
 
 \ /
  Last update: 2022-06-07 20:14    [W:2.966 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site