lkml.org 
[lkml]   [2022]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 18/21] drm/mediatek: Add mt8195 Embedded DisplayPort driver
From
Date
Hi, Rex:

On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> From: Markus Schneider-Pargmann <msp@baylibre.com>
>
> This patch adds a DisplayPort driver for the Mediatek mt8195 SoC.
>
> It supports the mt8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jason-JH.Lin <jason-jh.lin@mediatek.com>.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> ---

[snip]

> +
> +static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux,
> + struct drm_dp_aux_msg *msg)
> +{
> + struct mtk_dp *mtk_dp;
> + bool is_read;
> + u8 request;
> + size_t accessed_bytes = 0;
> + int ret = 0;
> +
> + mtk_dp = container_of(mtk_aux, struct mtk_dp, aux);
> +
> + if (!mtk_dp->train_info.cable_plugged_in ||
> + mtk_dp->train_info.irq_status & MTK_DP_HPD_DISCONNECT) {
> + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKCAP;

Changing state here has no any effect, so drop this.

> + return -EAGAIN;
> + }
> +
> + switch (msg->request) {
> + case DP_AUX_I2C_MOT:
> + case DP_AUX_I2C_WRITE:
> + case DP_AUX_NATIVE_WRITE:
> + case DP_AUX_I2C_WRITE_STATUS_UPDATE:
> + case DP_AUX_I2C_WRITE_STATUS_UPDATE | DP_AUX_I2C_MOT:
> + request = msg->request &
> ~DP_AUX_I2C_WRITE_STATUS_UPDATE;
> + is_read = false;
> + break;
> + case DP_AUX_I2C_READ:
> + case DP_AUX_NATIVE_READ:
> + case DP_AUX_I2C_READ | DP_AUX_I2C_MOT:
> + request = msg->request;
> + is_read = true;
> + break;
> + default:
> + drm_err(mtk_aux->drm_dev, "invalid aux cmd = %d\n",
> + msg->request);
> + return -EINVAL;
> + }
> +
> + if (msg->size == 0) {
> + ret = mtk_dp_aux_do_transfer(mtk_dp, is_read, request,
> + msg->address +
> accessed_bytes,
> + msg->buffer +
> accessed_bytes, 0);
> + } else {
> + while (accessed_bytes < msg->size) {
> + size_t to_access =
> + min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES,
> + msg->size - accessed_bytes);
> +
> + ret = mtk_dp_aux_do_transfer(mtk_dp,
> + is_read, request,
> + msg->address +
> accessed_bytes,
> + msg->buffer +
> accessed_bytes,
> + to_access);
> +
> + if (ret) {
> + drm_info(mtk_dp->drm_dev,
> + "Failed to do AUX transfer:
> %d\n", ret);
> + break;
> + }
> + accessed_bytes += to_access;
> + }
> + }
> +
> + if (ret) {
> + msg->reply = DP_AUX_NATIVE_REPLY_NACK |
> DP_AUX_I2C_REPLY_NACK;
> + return ret;
> + }
> +
> + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK;
> + return msg->size;
> +}

\
 
 \ /
  Last update: 2022-06-07 09:31    [W:0.489 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site