lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/3] arm64: dts: qcom: sm8450: rename interconnect nodes
Date
clk-virt and mc-virt interconnect nodes were named interconnect@0 and
interconnect@1. That is incorrect as we don't have unit addresses 0/1
for these node.

This causes warning:
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unit_address_vs_reg): /interconnect@0:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:261.26-265.4:
Warning (unit_address_vs_reg): /interconnect@1:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unique_unit_address_if_enabled): /interconnect@0:
duplicate unit-address (also used in node /soc@0)

Rename the nodes to interconnect-0 and interconnect-1 to fix the
warning.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 7d08fad76371..92887eaabe77 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -262,13 +262,13 @@ scm: scm {
};
};

- clk_virt: interconnect@0 {
+ clk_virt: interconnect-0 {
compatible = "qcom,sm8450-clk-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

- mc_virt: interconnect@1 {
+ mc_virt: interconnect-1 {
compatible = "qcom,sm8450-mc-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
--
2.34.1
\
 
 \ /
  Last update: 2022-06-06 08:53    [W:0.075 / U:19.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site