lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] dt-bindings: backlight: rt4831: Add the new property for ocp level selection
From
On 06/06/2022 03:39, ChiYuan Huang wrote:
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 於 2022年6月6日 週一 上午12:11寫道:
>>
>> On 02/06/2022 17:31, ChiYuan Huang wrote:
>>> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 於 2022年6月2日 週四 下午9:58寫道:
>>>>
>>>> On 02/06/2022 15:56, Rob Herring wrote:
>>>>> On Thu, May 26, 2022 at 12:32:12PM +0200, Krzysztof Kozlowski wrote:
>>>>>> On 26/05/2022 10:13, ChiYuan Huang wrote:
>>>>>>> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 於 2022年5月26日 週四 下午4:06寫道:
>>>>>>>>
>>>>>>>> On 26/05/2022 05:16, cy_huang wrote:
>>>>>>>>> From: ChiYuan Huang <cy_huang@richtek.com>
>>>>>>>>>
>>>>>>>>> Add the new property for ocp level selection.
>>>>>>>>>
>>>>>>>>> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
>>>>>>>>> ---
>>>>>>>>> .../bindings/leds/backlight/richtek,rt4831-backlight.yaml | 8 ++++++++
>>>>>>>>> include/dt-bindings/leds/rt4831-backlight.h | 5 +++++
>>>>>>>>> 2 files changed, 13 insertions(+)
>>>>>>>>>
>>>>>>>>> diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>>>>>> index e0ac686..c1c59de 100644
>>>>>>>>> --- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>>>>>> +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>>>>>> @@ -47,6 +47,14 @@ properties:
>>>>>>>>> minimum: 0
>>>>>>>>> maximum: 3
>>>>>>>>>
>>>>>>>>> + richtek,bled-ocp-sel:
>>>>>>>>
>>>>>>>> Skip "sel" as it is a shortcut of selection. Name instead:
>>>>>>>> "richtek,backlight-ocp"
>>>>>>>>
>>>>>>> OK, if so, do I need to rename all properties from 'bled' to 'backlight' ?
>>>>>>> If only this property is naming as 'backlight'. it may conflict with
>>>>>>> the others like as "richtek,bled-ovp-sel".
>>>>>>
>>>>>> Ah, no, no need.
>>>>>>
>>>>>>>>
>>>>>>>>> + description: |
>>>>>>>>> + Backlight OCP level selection, currently support 0.9A/1.2A/1.5A/1.8A
>>>>>>>>
>>>>>>>> Could you explain here what is OCP (unfold the acronym)?
>>>>>>> Yes. And the full name is 'over current protection'.
>>>>>>
>>>>>> Thanks and this leads to second thing - you encode register value
>>>>>> instead of logical value. This must be a logical value in mA, so
>>>>>> "richtek,bled-ocp-microamp".
>>>>>
>>>>> We already have common properties for setting current of LEDs. We should
>>>>> use that here I think.
>>>>
>>>> It might not be exactly the same. We have "led-max-microamp" which is
>>>> the maximum allowed current. I guess over-current protection level is
>>>> slightly higher (e.g. led-max-microamp + 1). IOW, led-max-microamp is
>>>> something which still can be set and used by system/hardware. OCP should
>>>> not.
>>>>
>>> Yap, you're right.
>>
>> So I am right or Rob?
>>
> As I know, both are incorrect.
>>> From the modern backlight IC design, it uses the boost converter architecture.
>>> This OCP level is to limit the inductor current when the internal MOS
>>> switch turn on.
>>> Details can refer to the below wiki link
>>> https://en.wikipedia.org/wiki/Boost_converter
>>>
>>> And based on it, OVP is used to limit the inductor output voltage.
>>> Each channel maximum current is based on the IC affordable limit.
>>> It is more like as what you said 'led-max-microamp'.
>>>
>>> So boost voltage level may depend on the LED VF.
>>> The different series of LED may cause different boost voltage.
>>>
>>> RT4831's OVP/OCP is not just the protection, more like as the limit.
>>
>> This suggests Rob is right, so let's use led-max-microamp property?
>>
> No, the meaning is different. 'led-max-microamp' always means the
> channel output current.
> It already can be adjusted by backlight brightness node.
>
> For example
> low voltage side (3.3~4.4V) to generate the boost voltage to 16~17V,
> even 20V for BLED Vout.
> This OCP is to limit the input current of low voltage side.
>
> After the explanation, do you still think it's the same thing?

This sounds differently so I propose to use this dedicated property with
the changes I asked for.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-06 08:23    [W:0.061 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site