lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G
From
Hello Rob,

On 06/06/22 04:13, Rob Herring wrote:
> On Thu, Jun 02, 2022 at 05:15:56PM +0530, Siddharth Vadapalli wrote:
>> Update bindings for TI K3 J7200 SoC which contains 5 ports (4 external
>> ports) CPSW5G module and add compatible for it.
>>
>> Changes made:
>> - Add new compatible ti,j7200-cpswxg-nuss for CPSW5G.
>> - Extend pattern properties for new compatible.
>> - Change maximum number of CPSW ports to 4 for new compatible.
>>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
>> ---
>> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 140 ++++++++++++------
>> 1 file changed, 98 insertions(+), 42 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> index b8281d8be940..ec57bde7ac26 100644
>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> @@ -57,6 +57,7 @@ properties:
>> - ti,am654-cpsw-nuss
>> - ti,j721e-cpsw-nuss
>> - ti,am642-cpsw-nuss
>> + - ti,j7200-cpswxg-nuss
>>
>> reg:
>> maxItems: 1
>> @@ -108,48 +109,103 @@ properties:
>> const: 1
>> '#size-cells':
>> const: 0
>> -
>> - patternProperties:
>> - port@[1-2]:
>> - type: object
>> - description: CPSWxG NUSS external ports
>> -
>> - $ref: ethernet-controller.yaml#
>> -
>> - properties:
>> - reg:
>> - minimum: 1
>> - maximum: 2
>> - description: CPSW port number
>> -
>> - phys:
>> - maxItems: 1
>> - description: phandle on phy-gmii-sel PHY
>> -
>> - label:
>> - description: label associated with this port
>> -
>> - ti,mac-only:
>> - $ref: /schemas/types.yaml#/definitions/flag
>> - description:
>> - Specifies the port works in mac-only mode.
>> -
>> - ti,syscon-efuse:
>> - $ref: /schemas/types.yaml#/definitions/phandle-array
>> - items:
>> - - items:
>> - - description: Phandle to the system control device node which
>> - provides access to efuse
>> - - description: offset to efuse registers???
>> - description:
>> - Phandle to the system control device node which provides access
>> - to efuse IO range with MAC addresses
>> -
>> - required:
>> - - reg
>> - - phys
>> -
>> - additionalProperties: false
>> + allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - ti,am654-cpsw-nuss
>> + - ti,j721e-cpsw-nuss
>> + - ti,am642-cpsw-nuss
>> + then:
>> + patternProperties:
>> + port@[1-2]:
>> + type: object
>> + description: CPSWxG NUSS external ports
>> +
>> + $ref: ethernet-controller.yaml#
>> +
>> + properties:
>> + reg:
>> + minimum: 1
>> + maximum: 2
>> + description: CPSW port number
>> +
>> + phys:
>> + maxItems: 1
>> + description: phandle on phy-gmii-sel PHY
>> +
>> + label:
>> + description: label associated with this port
>> +
>> + ti,mac-only:
>> + $ref: /schemas/types.yaml#/definitions/flag
>> + description:
>> + Specifies the port works in mac-only mode.
>> +
>> + ti,syscon-efuse:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + items:
>> + - items:
>> + - description: Phandle to the system control device node which
>> + provides access to efuse
>> + - description: offset to efuse registers???
>> + description:
>> + Phandle to the system control device node which provides access
>> + to efuse IO range with MAC addresses
>> +
>> + required:
>> + - reg
>> + - phys
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - ti,j7200-cpswxg-nuss
>> + then:
>> + patternProperties:
>> + port@[1-4]:
>> + type: object
>> + description: CPSWxG NUSS external ports
>> +
>> + $ref: ethernet-controller.yaml#
>> +
>> + properties:
>> + reg:
>> + minimum: 1
>> + maximum: 4
>> + description: CPSW port number
>> +
>> + phys:
>> + maxItems: 1
>> + description: phandle on phy-gmii-sel PHY
>> +
>> + label:
>> + description: label associated with this port
>> +
>> + ti,mac-only:
>> + $ref: /schemas/types.yaml#/definitions/flag
>> + description:
>> + Specifies the port works in mac-only mode.
>> +
>> + ti,syscon-efuse:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + items:
>> + - items:
>> + - description: Phandle to the system control device node which
>> + provides access to efuse
>> + - description: offset to efuse registers???
>> + description:
>> + Phandle to the system control device node which provides access
>> + to efuse IO range with MAC addresses
>> +
>> + required:
>> + - reg
>> + - phys
>
> You are now defining the same properties twice. Don't do that. Just add
> an if/then schema restrict port nodes.

Thank you for reviewing the patch. I will fix this and send v3 for this series.

Thanks,
Siddharth.

\
 
 \ /
  Last update: 2022-06-06 08:23    [W:0.069 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site