lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 0/2] Introduce MediaTek CCI devfreq driver
On Fri, May 27, 2022 at 7:01 PM Johnson Wang <johnson.wang@mediatek.com> wrote:
>
> The Cache Coherent Interconnect (CCI) is the management of cache
> coherency by hardware. CCI DEVFREQ is DVFS driver for power saving by
> scaling clock frequency and supply voltage of CCI. CCI uses the same
> input clock source and power rail as LITTLE CPUs on Mediatek SoCs.
>
> This series depends on:
> Chanwoo's repo: kernel/git/chanwoo/linux.git
> branch: devfreq-testing
> [1]: PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
> [2]: PM / devfreq: Add cpu based scaling support to passive governor
> [3]: PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
> [4]: PM / devfreq: passive: Update frequency when start governor
>
> Changes in v6:
> - Remove unnecessary "goto" statement.
>
> Changes in v5:
> - Modify some binding description.
> - Remove pre_voltage member.
> - Not to enable/disable intermediate clock.
> - Not to "put" resources that using devm_ variants.
>
> Resend v4:
> - CC interconnect maintainer.
> - Change sign-off sequence in commit message.
>
> Changes in v4:
> - Add a maintainer in the binding document.
> - Modify clock description.
> - Add binding document into MAINTAINERS.
> - Replace format specifier %d with %ld.
>
> Changes in v3:
> - Move binding document to 'interconnect' and rename it.
> - Add COMPILE_TEST dependence symbol.
> - Remove need_voltage_tracking variable.
> - Move mtk_ccifreq_voltage_tracking() code into mtk_ccifreq_set_voltage().
> - Add an interation limit in the while() loop.
> - Replace 'cci_dev' with 'dev'
> - Replace old_* with pre_*
> - Remove of_match_ptr()
> - Use module_platform_driver()
>
> Changes in v2:
> - Take MT8183 as example in binding document.
> - Use dev_err() instead of pr_err().
> - Use 'goto' statement to handle error case.
> - Clean up driver code.
>
> Johnson Wang (2):
> dt-bindings: interconnect: Add MediaTek CCI dt-bindings
> PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver

FTR,

Tested-by: Chen-Yu Tsai <wenst@chromium.org>

\
 
 \ /
  Last update: 2022-06-06 12:13    [W:0.129 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site