lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 21/36] serial: stm32: Fill in rs485_supported
Date
Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/tty/serial/stm32-usart.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index b7b44f4050d4..db3dd9731ee1 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1375,6 +1375,13 @@ static void stm32_usart_deinit_port(struct stm32_port *stm32port)
clk_disable_unprepare(stm32port->clk);
}

+static const struct serial_rs485 stm32_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+ SER_RS485_RX_DURING_TX,
+ .delay_rts_before_send = 1,
+ .delay_rts_after_send = 1,
+};
+
static int stm32_usart_init_port(struct stm32_port *stm32port,
struct platform_device *pdev)
{
@@ -1394,6 +1401,7 @@ static int stm32_usart_init_port(struct stm32_port *stm32port,
port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE);
port->irq = irq;
port->rs485_config = stm32_usart_config_rs485;
+ port->rs485_supported = &stm32_rs485_supported;

ret = stm32_usart_init_rs485(port, pdev);
if (ret)
--
2.30.2
\
 
 \ /
  Last update: 2022-06-06 12:09    [W:0.599 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site