lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 19/36] serial: omap: Fill in rs485_supported
Date
Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/tty/serial/omap-serial.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 46f4d4cacb6e..98622c35d896 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1559,6 +1559,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
return 0;
}

+static const struct serial_rs485 serial_omap_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+ SER_RS485_RX_DURING_TX,
+ .delay_rts_before_send = 1,
+ .delay_rts_after_send = 1,
+};
+
static int serial_omap_probe(struct platform_device *pdev)
{
struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
@@ -1636,6 +1643,7 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.flags = omap_up_info->flags;
up->port.uartclk = omap_up_info->uartclk;
up->port.rs485_config = serial_omap_config_rs485;
+ up->port.rs485_supported = &serial_omap_rs485_supported;
if (!up->port.uartclk) {
up->port.uartclk = DEFAULT_CLK_SPEED;
dev_warn(&pdev->dev,
--
2.30.2
\
 
 \ /
  Last update: 2022-06-06 12:09    [W:0.226 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site