lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/36] serial: 8250_pci: Fill in rs485_supported for pci_fintek
Date
Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/tty/serial/8250/8250_pci.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index fb0a49e39072..a76254031bc2 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1597,6 +1597,11 @@ static int pci_fintek_rs485_config(struct uart_port *port,
return 0;
}

+static const struct serial_rs485 pci_fintek_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
+ /* F81504/508/512 does not support RTS delay before or after send */
+};
+
static int pci_fintek_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -1616,6 +1621,7 @@ static int pci_fintek_setup(struct serial_private *priv,
port->port.iotype = UPIO_PORT;
port->port.iobase = iobase;
port->port.rs485_config = pci_fintek_rs485_config;
+ port->port.rs485_supported = &pci_fintek_rs485_supported;

data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL);
if (!data)
--
2.30.2
\
 
 \ /
  Last update: 2022-06-06 12:09    [W:1.935 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site