[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/7] SCMIv3.1 Powercap protocol and driver
Hi all,

this short series introduces the last missing bit of SCMIv3.1, Powercap
protocol. Along the series, there is a small refactoring around the SCMI
FastChannels handling routines so as to reuse as much as possible the
pre-existent (and tested) FastChannel code from the Perf protocol.

As a last step in the series an ARM SCMI based powercap driver is added,
which takes care to expose via the Powercap framework all the SCMI Powercap
zones that have been discovered asking the SCMI platform firmware.

Basic testing has been performed against an emulated SCMI platform
supporting SCMIv3.1 Powercap protocol using powercap-utils, with the
exclusion of the FCs bits whose generalization has been only tested for
regression on a JUNO platform sporting a regular SCP/SCMI v2.10 fw.

The series is based on sudeep/for-next/scmi [1] on top of:

commit ef189d7c6156 ("firmware: arm_scmi: Remove all the unused local variables")


v1 --> v2:
- fixed measurements thresholds updates to trigger notification
enable update commands
- added a bit more comments
- usig bitfield.h macros
- fixed sparse complaint about missing static on global


Cristian Marussi (7):
dt-bindings: firmware: arm,scmi: Add powercap protocol
firmware: arm_scmi: Add SCMIv3.1 Powercap protocol basic support
firmware: arm_scmi: Generalize FastChannel support
firmware: arm_scmi: Add SCMIv3.1 Powercap FastChannels support
firmware: arm_scmi: Make use of FastChannels configurable
firmware: arm_scmi: Add scmi_driver optional setup/teardown callbacks
powercap: arm_scmi: Add SCMI Powercap based driver

.../bindings/firmware/arm,scmi.yaml | 10 +
drivers/firmware/arm_scmi/Kconfig | 13 +
drivers/firmware/arm_scmi/Makefile | 2 +-
drivers/firmware/arm_scmi/bus.c | 15 +-
drivers/firmware/arm_scmi/driver.c | 167 ++++
drivers/firmware/arm_scmi/perf.c | 218 +----
drivers/firmware/arm_scmi/powercap.c | 857 ++++++++++++++++++
drivers/firmware/arm_scmi/protocols.h | 23 +
drivers/powercap/Kconfig | 13 +
drivers/powercap/Makefile | 1 +
drivers/powercap/arm_scmi_powercap.c | 537 +++++++++++
include/linux/scmi_protocol.h | 129 +++
12 files changed, 1810 insertions(+), 175 deletions(-)
create mode 100644 drivers/firmware/arm_scmi/powercap.c
create mode 100644 drivers/powercap/arm_scmi_powercap.c


 \ /
  Last update: 2022-06-06 12:07    [W:0.089 / U:2.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site