lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Re: Re: [PATCH] mm/memory-failure: don't allow to unpoison hw corrupted page
Date
On Mon, Jun 06, 2022 at 03:20:27PM +0800, zhenwei pi wrote:
>
>
> On 6/6/22 12:32, HORIGUCHI NAOYA(堀口 直也) wrote:
> > On Sun, Jun 05, 2022 at 12:24:24PM +0800, zhenwei pi wrote:
> > >
> > >
> > > On 6/5/22 02:56, Andrew Morton wrote:
> > > > On Sat, 4 Jun 2022 18:32:29 +0800 zhenwei pi <pizhenwei@bytedance.com> wrote:
> > > >
> > > > > Currently unpoison_memory(unsigned long pfn) is designed for soft
> > > > > poison(hwpoison-inject) only. Unpoisoning a hardware corrupted page
> > > > > puts page back buddy only, this leads BUG during accessing on the
> > > > > corrupted KPTE.
> >
> > Thank you for the patch. I think this will be helpful for integration testing.
> >
> > You mention "hardware corrupted page" as the condition of this bug, and I
> > think that it means a real hardware error, but this BUG seems to be
> > triggered when we use mce-inject or APEI (these are also software injection
> > without corrupting the memory physically). So the actual condition is
> > "when memory_failure() is called by MCE handler"?
> >
>
> Yes, I use QEMU to emulate a 'real hardware error' by command:
> virsh qemu-monitor-command vm --hmp mce 0 9 0xbd000000000000c0 0xd
> 0x61234000 0x8c
>
> > > > >
> > > > > Do not allow to unpoison hardware corrupted page in unpoison_memory()
> > > > > to avoid BUG like this:
> > > > >
> > > > > Unpoison: Software-unpoisoned page 0x61234
> > > > > BUG: unable to handle page fault for address: ffff888061234000
> > > >
> > > > Thanks.
> > > >
> > > > > --- a/mm/memory-failure.c
> > > > > +++ b/mm/memory-failure.c
> > > > > @@ -2090,6 +2090,7 @@ int unpoison_memory(unsigned long pfn)
> > > > > {
> > > > > struct page *page;
> > > > > struct page *p;
> > > > > + pte_t *kpte;
> > > > > int ret = -EBUSY;
> > > > > int freeit = 0;
> > > > > static DEFINE_RATELIMIT_STATE(unpoison_rs, DEFAULT_RATELIMIT_INTERVAL,
> > > > > @@ -2101,6 +2102,13 @@ int unpoison_memory(unsigned long pfn)
> > > > > p = pfn_to_page(pfn);
> > > > > page = compound_head(p);
> > > > > + kpte = virt_to_kpte((unsigned long)page_to_virt(p));
> > > > > + if (kpte && !pte_present(*kpte)) {
> > > > > + unpoison_pr_info("Unpoison: Page was hardware poisoned %#lx\n",
> > > > > + pfn, &unpoison_rs);
> >
> > This can prevent unpoison for hwpoison on 4kB pages, but not for hugetlb pages,
> > where I see the similar BUG as follows (even with applying your patch):
> >
> > [ 917.806712] BUG: unable to handle page fault for address: ffff9f7bb3201000
> > [ 917.810144] #PF: supervisor write access in kernel mode
> > [ 917.812588] #PF: error_code(0x0002) - not-present page
> > [ 917.815007] PGD 104801067 P4D 104801067 PUD 10006b063 PMD 1052d0063 PTE 800ffffeccdfe062
> > [ 917.818768] Oops: 0002 [#1] PREEMPT SMP PTI
> > [ 917.820759] CPU: 0 PID: 7774 Comm: test_alloc_gene Tainted: G M OE 5.18.0-v5.18-220606-0942-029-ge4dcc+ #47
> > [ 917.825720] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
> > [ 917.829762] RIP: 0010:clear_page_erms+0x7/0x10
> > [ 917.831867] Code: 48 89 47 18 48 89 47 20 48 89 47 28 48 89 47 30 48 89 47 38 48 8d 7f 40 75 d9 90 c3 0f 1f 80 00 00 00 00 b9 00 10 00 00 31 c0 <f3> aa c3 cc cc cc cc cc cc 48 85 ff 0f 84 d3 00 00 00 0f b6 0f 4c
> > [ 917.840540] RSP: 0000:ffffab49c25ebdf0 EFLAGS: 00010246
> > [ 917.842839] RAX: 0000000000000000 RBX: ffffd538c4cc8000 RCX: 0000000000001000
> > [ 917.845835] RDX: 0000000080000000 RSI: 00007f2aeb600000 RDI: ffff9f7bb3201000
> > [ 917.848687] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
> > [ 917.851377] R10: 0000000000000002 R11: ffff9f7b87e3a2a0 R12: 0000000000000000
> > [ 917.854035] R13: 0000000000000001 R14: ffffd538c4cc8000 R15: ffff9f7bc002a5d8
> > [ 917.856539] FS: 00007f2aebad3740(0000) GS:ffff9f7bbbc00000(0000) knlGS:0000000000000000
> > [ 917.859229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 917.861149] CR2: ffff9f7bb3201000 CR3: 0000000107726003 CR4: 0000000000170ef0
> > [ 917.863433] Call Trace:
> > [ 917.864266] <TASK>
> > [ 917.864961] clear_huge_page+0x147/0x270
> > [ 917.866236] hugetlb_fault+0x440/0xad0
> > [ 917.867366] handle_mm_fault+0x270/0x290
> > [ 917.868532] do_user_addr_fault+0x1c3/0x680
> > [ 917.869768] exc_page_fault+0x6c/0x160
> > [ 917.870912] ? asm_exc_page_fault+0x8/0x30
> > [ 917.872082] asm_exc_page_fault+0x1e/0x30
> > [ 917.873220] RIP: 0033:0x7f2aeb8ba367
> >
> > I don't think of a workaround for this now ...
> >
>
> Could you please tell me how to reproduce this issue?

You are familiar with qemu-monitor-command, so the following procedure
should work for you:

- run a process using hugepages on your VM,
- check the guest physical address of the hugepage (page-types.c is helpful for this),
- inject a MCE with virsh qemu-monitor-command on the guest physical address, then
- unpoison the injected physical address.


Maybe the above is enough, but in case let me share my procedure using
my own test tool.

$ git clone https://github.com/nhoriguchi/mm_regression
$ cd mm_regression
$ ... # Make sure the prerequisites (see README.md) are met.
$ make # Some files may fail to build, but it's ok if
# test_alloc_generic.c is built.
$ ./run.sh prepare debug
$ ./run.sh recipe list | grep mce/uc/srao/backend-hugetlb > work/debug/recipelist
$ RUN_MODE=all ./run.sh project run
$ RUN_MODE=all ./run.sh project run -a # when you want to rerun

I don't want bother you to learn this tool, so if something go wrong,
feel free to let me know.

Thanks,
Naoya Horiguchi
\
 
 \ /
  Last update: 2022-06-06 11:17    [W:1.555 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site