lkml.org 
[lkml]   [2022]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH 0/3] Enable clk-critical to bd718x7
Date
The imx8mn cpu smms2 module is clocked by the pmic that provides
clk32K. If the pmic clk driver is loaded the device can not boot. This
series try to make this configuration possible. We mark the
pmic clock as critical.

Open question:
clock-critical is not documentated as dts properties and could be
clock-critical can be changed as no-int one.
This is a follow up of [1]

[1] https://lore.kernel.org/linux-devicetree/20220604183905.1025201-1-michael@amarulasolutions.com/T/#u

Michael Trimarchi (3):
clk: bd718x7: Clean up the code, no functional changes
clk: bd718x7: Enable the possibility to mark the clock as critical
arm64: dts: imx8mn-bsh-smm-s2/pro: Add pmic clock connection

.../freescale/imx8mn-bsh-smm-s2-common.dtsi | 5 ++++
drivers/clk/clk-bd718x7.c | 23 +++++++++++--------
2 files changed, 19 insertions(+), 9 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2022-06-05 19:04    [W:0.020 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site