lkml.org 
[lkml]   [2022]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: max98390: use linux/gpio/consumer.h to fix build
Date
Change the header file to fix build errors in max98390.c:

../sound/soc/codecs/max98390.c: In function 'max98390_i2c_probe':
../sound/soc/codecs/max98390.c:1076:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
1076 | reset_gpio = devm_gpiod_get_optional(&i2c->dev,
../sound/soc/codecs/max98390.c:1077:55: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
1077 | "reset", GPIOD_OUT_HIGH);
../sound/soc/codecs/max98390.c:1077:55: note: each undeclared identifier is reported only once for each function it appears in
../sound/soc/codecs/max98390.c:1083:17: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
1083 | gpiod_set_value_cansleep(reset_gpio, 0);

Fixes: 397ff0249606 ("ASoC: max98390: Add reset gpio control")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Steve Lee <steve.lee.analog@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
---
sound/soc/codecs/max98390.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/codecs/max98390.c
+++ b/sound/soc/codecs/max98390.c
@@ -10,7 +10,7 @@
#include <linux/cdev.h>
#include <linux/dmi.h>
#include <linux/firmware.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
\
 
 \ /
  Last update: 2022-06-05 18:31    [W:0.057 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site