lkml.org 
[lkml]   [2022]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/8] soc: imx: add icc paths for i.MX8MP media blk ctrl
Hi Peng,

Thank you for the patch.

On Wed, Jun 01, 2022 at 05:45:33PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add interconnect paths for i.MX8MP media blk ctrl
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 1 +
> drivers/soc/imx/imx8m-blk-ctrl.c | 31 +++++++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index d9542dfff83f..2a1c6ff37e03 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/clock/imx8mp-clock.h>
> +#include <dt-bindings/interconnect/fsl,imx8mp.h>
> #include <dt-bindings/power/imx8mp-power.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index 7f49385ed2f8..423cac0c9cb6 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -5,6 +5,7 @@
> */
>
> #include <linux/device.h>
> +#include <linux/interconnect.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> @@ -37,6 +38,8 @@ struct imx8m_blk_ctrl_domain_data {
> const char *name;
> const char * const *clk_names;
> int num_clks;
> + const char * const *path_names;
> + int num_paths;
> const char *gpc_name;
> u32 rst_mask;
> u32 clk_mask;
> @@ -52,11 +55,13 @@ struct imx8m_blk_ctrl_domain_data {
> };
>
> #define DOMAIN_MAX_CLKS 4
> +#define DOMAIN_MAX_PATHS 4
>
> struct imx8m_blk_ctrl_domain {
> struct generic_pm_domain genpd;
> const struct imx8m_blk_ctrl_domain_data *data;
> struct clk_bulk_data clks[DOMAIN_MAX_CLKS];
> + struct icc_bulk_data paths[DOMAIN_MAX_PATHS];
> struct device *power_dev;
> struct imx8m_blk_ctrl *bc;
> };
> @@ -117,6 +122,10 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> if (data->mipi_phy_rst_mask)
> regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
>
> + ret = icc_bulk_set_bw(data->num_paths, domain->paths);
> + if (ret)
> + dev_err(bc->dev, "failed to set icc bw\n");

Don't we need to "release" the bandwidth on power off ?

> +
> /* disable upstream clocks */
> clk_bulk_disable_unprepare(data->num_clks, domain->clks);
>
> @@ -228,6 +237,18 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
> for (j = 0; j < data->num_clks; j++)
> domain->clks[j].id = data->clk_names[j];
>
> + for (j = 0; j < data->num_paths; j++) {
> + domain->paths[j].name = data->path_names[j];
> + domain->paths[j].avg_bw = INT_MAX;
> + domain->paths[j].peak_bw = INT_MAX;

That's harsh :-) I suppose it's good enough to start with, but I wonder
if we'll need more control later.

> + }
> +
> + ret = devm_of_icc_bulk_get(dev, data->num_paths, domain->paths);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to get noc entries\n");
> + goto cleanup_pds;
> + }
> +
> ret = devm_clk_bulk_get(dev, data->num_clks, domain->clks);
> if (ret) {
> dev_err_probe(dev, ret, "failed to get clock\n");
> @@ -647,6 +668,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
> .gpc_name = "lcdif1",
> .rst_mask = BIT(4) | BIT(5) | BIT(23),
> .clk_mask = BIT(4) | BIT(5) | BIT(23),
> + .path_names = (const char *[]){"lcdif-rd", "lcdif-wr"},
> + .num_paths = 2,
> },
> [IMX8MP_MEDIABLK_PD_ISI] = {
> .name = "mediablk-isi",
> @@ -655,6 +678,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
> .gpc_name = "isi",
> .rst_mask = BIT(6) | BIT(7),
> .clk_mask = BIT(6) | BIT(7),
> + .path_names = (const char *[]){"isi0", "isi1", "isi2"},
> + .num_paths = 3,
> },
> [IMX8MP_MEDIABLK_PD_MIPI_CSI2_2] = {
> .name = "mediablk-mipi-csi2-2",
> @@ -672,6 +697,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
> .gpc_name = "lcdif2",
> .rst_mask = BIT(11) | BIT(12) | BIT(24),
> .clk_mask = BIT(11) | BIT(12) | BIT(24),
> + .path_names = (const char *[]){"lcdif-rd", "lcdif-wr"},
> + .num_paths = 2,
> },
> [IMX8MP_MEDIABLK_PD_ISP] = {
> .name = "mediablk-isp",
> @@ -680,6 +707,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
> .gpc_name = "isp",
> .rst_mask = BIT(16) | BIT(17) | BIT(18),
> .clk_mask = BIT(16) | BIT(17) | BIT(18),
> + .path_names = (const char *[]){"isp0", "isp1"},
> + .num_paths = 2,

As far as I understand, there's a single power domain for both ISP
instances (I'm not entirely sure this is on purpose or a design mistake,
but that's another story), but one interconnect path for each ISP
instance. Would there be any use case for controlling them separately ?
I can't really think of any myself.

> },
> [IMX8MP_MEDIABLK_PD_DWE] = {
> .name = "mediablk-dwe",
> @@ -688,6 +717,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
> .gpc_name = "dwe",
> .rst_mask = BIT(19) | BIT(20) | BIT(21),
> .clk_mask = BIT(19) | BIT(20) | BIT(21),
> + .path_names = (const char *[]){"dwe"},
> + .num_paths = 1,
> },
> [IMX8MP_MEDIABLK_PD_MIPI_DSI_2] = {
> .name = "mediablk-mipi-dsi-2",

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2022-06-04 23:46    [W:0.124 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site