lkml.org 
[lkml]   [2022]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/7] can: Kbuild: rename config symbol CAN_DEV into CAN_NETLINK
Date
In the next patches, the scope of the can-dev module will grow to
engloble the software/virtual drivers (slcan, v(x)can). To this
extent, release CAN_DEV by renaming it into CAN_NETLINK. The config
symbol CAN_DEV will be reused to cover this extended scope.

The rationale for the name CAN_NETLINK is that netlink is the
predominant feature added here.

The current description only mentions platform drivers despite the
fact that this symbol is also required by "normal" devices (e.g. USB
or PCI) which do not fall under the platform devices category. The
description is updated accordingly to fix this gap.

Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
---
Please share if you have any suggestion on the name. I hesitated a lot
between CAN_NETLINK or CAN_DEV_NETLINK (because netlink is the
predominant feature) and CAN_DEV_HW (because this targets the
non-software only drivers, i.e. the hardware ones).
---
drivers/net/can/Kconfig | 18 +++++++++++-------
drivers/net/can/dev/Makefile | 2 +-
2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index b2dcc1e5a388..99f189ad35ad 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -48,15 +48,19 @@ config CAN_SLCAN
can be changed by the 'maxdev=xx' module option. This driver can
also be built as a module. If so, the module will be called slcan.

-config CAN_DEV
- tristate "Platform CAN drivers with Netlink support"
+config CAN_NETLINK
+ tristate "CAN device drivers with Netlink support"
default y
help
- Enables the common framework for platform CAN drivers with Netlink
- support. This is the standard library for CAN drivers.
- If unsure, say Y.
+ Enables the common framework for CAN device drivers. This is the
+ standard library and provides features for the Netlink interface such
+ as bittiming validation, support of CAN error states, device restart
+ and others.
+
+ This is required by all platform and hardware CAN drivers. If you
+ plan to use such devices or if unsure, say Y.

-if CAN_DEV
+if CAN_NETLINK

config CAN_CALC_BITTIMING
bool "CAN bit-timing calculation"
@@ -164,7 +168,7 @@ source "drivers/net/can/softing/Kconfig"
source "drivers/net/can/spi/Kconfig"
source "drivers/net/can/usb/Kconfig"

-endif
+endif #CAN_NETLINK

config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile
index af2901db473c..5b4c813c6222 100644
--- a/drivers/net/can/dev/Makefile
+++ b/drivers/net/can/dev/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0

-obj-$(CONFIG_CAN_DEV) += can-dev.o
+obj-$(CONFIG_CAN_NETLINK) += can-dev.o
can-dev-y += bittiming.o
can-dev-y += dev.o
can-dev-y += length.o
--
2.35.1
\
 
 \ /
  Last update: 2022-06-04 18:33    [W:1.105 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site