lkml.org 
[lkml]   [2022]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/7] can: bittiming: move bittiming calculation functions to calc_bittiming.c
On 04.06.2022 21:21:01, Vincent MAILHOL wrote:
> On Sat. 4 June 2022 at 20:25, Marc Kleine-Budde <mkl@pengutronix.de> wrote:
> > On 03.06.2022 19:28:44, Vincent Mailhol wrote:
> > > The canonical way to select or deselect an object during compilation
> > > is to use this pattern in the relevant Makefile:
> > >
> > > bar-$(CONFIG_FOO) := foo.o
> > >
> > > bittiming.c instead uses some #ifdef CONFIG_CAN_CALC_BITTIMG.
> > >
> > > Create a new file named calc_bittiming.c with all the functions which
> > > are conditionally compiled with CONFIG_CAN_CALC_BITTIMG and modify the
> > > Makefile according to above pattern.
> > >
> > > Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> > > ---
> > > drivers/net/can/Kconfig | 4 +
> > > drivers/net/can/dev/Makefile | 2 +
> > > drivers/net/can/dev/bittiming.c | 197 --------------------------
> > > drivers/net/can/dev/calc_bittiming.c | 202 +++++++++++++++++++++++++++
> > > 4 files changed, 208 insertions(+), 197 deletions(-)
> > > create mode 100644 drivers/net/can/dev/calc_bittiming.c
> > >
> > > diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
> > > index b1e47f6c5586..8f3b97aea638 100644
> > > --- a/drivers/net/can/Kconfig
> > > +++ b/drivers/net/can/Kconfig
> > > @@ -96,6 +96,10 @@ config CAN_CALC_BITTIMING
> > > source clock frequencies. Disabling saves some space, but then the
> > > bit-timing parameters must be specified directly using the Netlink
> > > arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
> > > +
> > > + The additional features selected by this option will be added to the
> > > + can-dev module.
> > > +
> > > If unsure, say Y.
> > >
> > > config CAN_AT91
> > > diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile
> > > index 919f87e36eed..b8a55b1d90cd 100644
> > > --- a/drivers/net/can/dev/Makefile
> > > +++ b/drivers/net/can/dev/Makefile
> > > @@ -9,3 +9,5 @@ can-dev-$(CONFIG_CAN_NETLINK) += dev.o
> > > can-dev-$(CONFIG_CAN_NETLINK) += length.o
> > > can-dev-$(CONFIG_CAN_NETLINK) += netlink.o
> > > can-dev-$(CONFIG_CAN_NETLINK) += rx-offload.o
> > > +
> > > +can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o
> >
> > Nitpick:
> > Can we keep this list sorted?
>
> My idea was first to group per CONFIG symbol according to the
> different levels: CAN_DEV first, then CAN_NETLINK and finally
> CAN_CALC_BITTIMING and CAN_RX_OFFLOAD. And then only sort by
> alphabetical order within each group.

I was thinking to order by CONFIG symbol and put the objects without an
additional symbol first

> By sorting the list, do literally mean to sort each line like this:
>
> obj-$(CONFIG_CAN_DEV) += can-dev.o
> can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o
> can-dev-$(CONFIG_CAN_DEV) += skb.o
> can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o
> can-dev-$(CONFIG_CAN_NETLINK) += dev.o
> can-dev-$(CONFIG_CAN_NETLINK) += length.o
> can-dev-$(CONFIG_CAN_NETLINK) += netlink.o
> can-dev-$(CONFIG_CAN_RX_OFFLOAD) += rx-offload.o

...which results in:

obj-$(CONFIG_CAN_DEV) += can-dev.o

can-dev-y += skb.o

can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o
can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o
can-dev-$(CONFIG_CAN_NETLINK) += dev.o
can-dev-$(CONFIG_CAN_NETLINK) += length.o
can-dev-$(CONFIG_CAN_NETLINK) += netlink.o
can-dev-$(CONFIG_CAN_RX_OFFLOAD) += rx-offload.o

> or do you mean to sort by object name (ignoring the config symbol) like that:
>
> obj-$(CONFIG_CAN_DEV) += can-dev.o
> can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o
> can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o
> can-dev-$(CONFIG_CAN_NETLINK) += dev.o
> can-dev-$(CONFIG_CAN_NETLINK) += length.o
> can-dev-$(CONFIG_CAN_NETLINK) += netlink.o
> can-dev-$(CONFIG_CAN_RX_OFFLOAD) += rx-offload.o
> can-dev-$(CONFIG_CAN_DEV) += skb.o
>
> ?
>
> (I honestly do not care so much how we sort the lines. My logic of
> grouping first by CONFIG symbols seems more natural, but I am fine to
> go with any other suggestion).

I think this makes it clear where new files should be added.

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-06-04 14:43    [W:0.147 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site