lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 14/15] power: axp20x_battery: Support battery status without fuel gauge
On Wed, Jun 29, 2022 at 4:30 PM Aidan MacDonald
<aidanmacdonald.0x0@gmail.com> wrote:
>
> Add a "has_fg" flag to indicate that the chip has a fuel gauge.
> Report battery full status on chips with no fuel gauge using the
> battery voltage.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
> drivers/power/supply/axp20x_battery.c | 34 ++++++++++++++++++++++++++-
> 1 file changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> index 401779d84d2b..574c1d001556 100644
> --- a/drivers/power/supply/axp20x_battery.c
> +++ b/drivers/power/supply/axp20x_battery.c
> @@ -69,6 +69,7 @@ struct axp_data {
> * must have AXP20X_CHRG_CTRL1_TGT_CURR+1 elements.
> */
> const int *ccc_table;
> + bool has_fg;
> bool has_fg_valid;
> int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
> int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
> @@ -197,7 +198,7 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
> union power_supply_propval *val)
> {
> struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
> - int ret = 0, reg, val1;
> + int ret = 0, reg, val1, val2;
>
> switch (psp) {
> case POWER_SUPPLY_PROP_PRESENT:
> @@ -231,6 +232,34 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
> return 0;
> }
>
> + /*
> + * If the chip does not have a fuel gauge, we check battery full status
> + * using voltage instead.
> + */
> + if (!axp20x_batt->data->has_fg) {
> + ret = axp20x_batt->data->get_max_voltage(axp20x_batt, &val1);
> + if (ret)
> + return ret;
> +
> + ret = iio_read_channel_processed(axp20x_batt->batt_v, &val2);
> + if (ret)
> + return ret;
> +
> + /* IIO subsystem reports voltage in mV but we need uV */
> + val2 *= 1000;
> +
> + /*
> + * According to the AXP192 datasheet, charging will restart if
> + * the battery voltage drops below V_rch = V_tgt - 0.1 V, so we
> + * report the battery is full if its voltage is at least V_rch.
> + */
> + if (val2 >= val1 - 100000)
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + else
> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + break;
> + }
> +
> ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
> if (ret)
> return ret;
> @@ -552,6 +581,7 @@ static const struct power_supply_desc axp20x_batt_ps_desc = {
> static const struct axp_data axp209_data = {
> .ccc_scale = 100000,
> .ccc_offset = 300000,
> + .has_fg = true,
> .get_max_voltage = axp20x_battery_get_max_voltage,
> .set_max_voltage = axp20x_battery_set_max_voltage,
> };
> @@ -559,6 +589,7 @@ static const struct axp_data axp209_data = {
> static const struct axp_data axp221_data = {
> .ccc_scale = 150000,
> .ccc_offset = 300000,
> + .has_fg = true,
> .has_fg_valid = true,
> .get_max_voltage = axp22x_battery_get_max_voltage,
> .set_max_voltage = axp22x_battery_set_max_voltage,
> @@ -567,6 +598,7 @@ static const struct axp_data axp221_data = {
> static const struct axp_data axp813_data = {
> .ccc_scale = 200000,
> .ccc_offset = 200000,
> + .has_fg = true,
> .has_fg_valid = true,
> .get_max_voltage = axp813_battery_get_max_voltage,
> .set_max_voltage = axp20x_battery_set_max_voltage,
> --
> 2.35.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2022-06-30 10:02    [W:0.453 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site