lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 13/15] power: axp20x_battery: Add constant charge current table
On Wed, Jun 29, 2022 at 4:30 PM Aidan MacDonald
<aidanmacdonald.0x0@gmail.com> wrote:
>
> Add a table-based lookup method for constant charge current,
> which is necessary when the setting cannot be represented as
> a linear range.
>
> This also replaces the hard-coded 300 mA default ccc setting
> if the DT-specified value is unsupported; the minimum value
> for the device is now set exactly instead of relying on the
> value being rounded down to a supported value.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
> drivers/power/supply/axp20x_battery.c | 59 +++++++++++++++++++++------
> 1 file changed, 47 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> index 9106077c0dbb..401779d84d2b 100644
> --- a/drivers/power/supply/axp20x_battery.c
> +++ b/drivers/power/supply/axp20x_battery.c
> @@ -61,6 +61,14 @@ struct axp20x_batt_ps;
> struct axp_data {
> int ccc_scale;
> int ccc_offset;
> + /*
> + * Lookup table for constant charge current, if provided this is used
> + * instead of ccc_scale/ccc_offset.
> + *
> + * The table is indexed by the field AXP20X_CHRG_CTRL1_TGT_CURR so it
> + * must have AXP20X_CHRG_CTRL1_TGT_CURR+1 elements.
> + */
> + const int *ccc_table;
> bool has_fg_valid;
> int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
> int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
> @@ -176,7 +184,10 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
>
> *val &= AXP20X_CHRG_CTRL1_TGT_CURR;
>
> - *val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
> + if (axp->data->ccc_table)
> + *val = axp->data->ccc_table[*val];
> + else
> + *val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
>
> return 0;
> }
> @@ -389,16 +400,35 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> AXP20X_CHRG_CTRL1_TGT_VOLT, val);
> }
>
> +static int axp20x_get_constant_charge_current_sel(struct axp20x_batt_ps *axp_batt,
> + int charge_current)
> +{
> + int i;
> +
> + if (axp_batt->data->ccc_table) {
> + for (i = AXP20X_CHRG_CTRL1_TGT_CURR; i >= 0; i--) {
> + if (axp_batt->data->ccc_table[i] <= charge_current)
> + return i;
> + }
> +
> + return -EINVAL;
> + }
> +
> + i = (charge_current - axp_batt->data->ccc_offset) / axp_batt->data->ccc_scale;
> + if (i > AXP20X_CHRG_CTRL1_TGT_CURR || i < 0)
> + return -EINVAL;
> +
> + return i;
> +}
> +
> static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
> int charge_current)
> {
> if (charge_current > axp_batt->max_ccc)
> return -EINVAL;
>
> - charge_current = (charge_current - axp_batt->data->ccc_offset) /
> - axp_batt->data->ccc_scale;
> -
> - if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
> + charge_current = axp20x_get_constant_charge_current_sel(axp_batt, charge_current);
> + if (charge_current < 0)
> return -EINVAL;
>
> return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1,
> @@ -410,14 +440,14 @@ static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
> {
> bool lower_max = false;
>
> - charge_current = (charge_current - axp->data->ccc_offset) /
> - axp->data->ccc_scale;
> -
> - if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
> + charge_current = axp20x_get_constant_charge_current_sel(axp, charge_current);
> + if (charge_current < 0)
> return -EINVAL;
>
> - charge_current = charge_current * axp->data->ccc_scale +
> - axp->data->ccc_offset;
> + if (axp->data->ccc_table)
> + charge_current = axp->data->ccc_table[charge_current];
> + else
> + charge_current = charge_current * axp->data->ccc_scale + axp->data->ccc_offset;
>
> if (charge_current > axp->max_ccc)
> dev_warn(axp->dev,
> @@ -629,7 +659,12 @@ static int axp20x_power_probe(struct platform_device *pdev)
> ccc)) {
> dev_err(&pdev->dev,
> "couldn't set constant charge current from DT: fallback to minimum value\n");
> - ccc = 300000;
> +
> + if (axp20x_batt->data->ccc_table)
> + ccc = axp20x_batt->data->ccc_table[0];
> + else
> + ccc = axp20x_batt->data->ccc_offset;
> +
> axp20x_batt->max_ccc = ccc;
> axp20x_set_constant_charge_current(axp20x_batt, ccc);
> }
> --
> 2.35.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2022-06-30 10:01    [W:0.237 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site