lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] remoteproc: qcom: pas: Add decrypt shutdown support for modem
On Fri 20 May 02:28 CDT 2022, Sibi Sankar wrote:

> The initial shutdown request to modem on SM8450 SoCs would start the
> decryption process and will keep returning errors until the modem shutdown
> is complete. Fix this by retrying shutdowns in fixed intervals.
>
> Err Logs on modem shutdown:
> qcom_q6v5_pas 4080000.remoteproc: failed to shutdown: -22
> remoteproc remoteproc3: can't stop rproc: -22
>
> Fixes: 5cef9b48458d ("remoteproc: qcom: pas: Add SM8450 remoteproc support")
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>

Looks reasonable, just two inquiries below.

> ---
> drivers/remoteproc/qcom_q6v5_pas.c | 67 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 66 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index 6ae39c5653b1..d04c4b877e12 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -8,6 +8,7 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/delay.h>
> #include <linux/firmware.h>
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> @@ -29,6 +30,8 @@
> #include "qcom_q6v5.h"
> #include "remoteproc_internal.h"
>
> +#define ADSP_DECRYPT_SHUTDOWN_DELAY_MS 100
> +
> struct adsp_data {
> int crash_reason_smem;
> const char *firmware_name;
> @@ -36,6 +39,7 @@ struct adsp_data {
> unsigned int minidump_id;
> bool has_aggre2_clk;
> bool auto_boot;
> + bool decrypt_shutdown;
>
> char **proxy_pd_names;
>
> @@ -65,6 +69,7 @@ struct qcom_adsp {
> unsigned int minidump_id;
> int crash_reason_smem;
> bool has_aggre2_clk;
> + bool decrypt_shutdown;
> const char *info_name;
>
> struct completion start_done;
> @@ -128,6 +133,20 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
> }
> }
>
> +static int adsp_decrypt_shutdown(struct qcom_adsp *adsp)
> +{
> + int retry_num = 50;

Seems unsigned to me.

> + int ret = -EINVAL;
> +
> + while (retry_num && ret) {
> + msleep(ADSP_DECRYPT_SHUTDOWN_DELAY_MS);
> + ret = qcom_scm_pas_shutdown(adsp->pas_id);
> + retry_num--;
> + }

Will qcom_scm_pas_shutdown() ever return any other errors than -EINVAL?

Would it make sense to make this:

do {
...;
} while (ret == -EINVAL && --retry_num);

> +
> + return ret;
> +}
> +
> static int adsp_unprepare(struct rproc *rproc)
> {
> struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
> @@ -249,6 +268,9 @@ static int adsp_stop(struct rproc *rproc)
> dev_err(adsp->dev, "timed out on wait\n");
>
> ret = qcom_scm_pas_shutdown(adsp->pas_id);
> + if (ret && adsp->decrypt_shutdown)
> + ret = adsp_decrypt_shutdown(adsp);
> +
> if (ret)
> dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
>
> @@ -459,6 +481,7 @@ static int adsp_probe(struct platform_device *pdev)
> adsp->pas_id = desc->pas_id;
> adsp->has_aggre2_clk = desc->has_aggre2_clk;
> adsp->info_name = desc->sysmon_name;
> + adsp->decrypt_shutdown = desc->decrypt_shutdown;
> platform_set_drvdata(pdev, adsp);
>
> device_wakeup_enable(adsp->dev);
> @@ -533,6 +556,7 @@ static const struct adsp_data adsp_resource_init = {
> .pas_id = 1,
> .has_aggre2_clk = false,
> .auto_boot = true,
> + .decrypt_shutdown = false,

With all these booleans, I would prefer if we cleaned it up to not list
the disabled options. That would make it quicker to spot which features
are actually enabled for each remoteproc.

Regards,
Bjorn

\
 
 \ /
  Last update: 2022-06-30 21:29    [W:0.102 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site