lkml.org 
[lkml]   [2022]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] drm/sun4i: sun8i: Add the ability to keep scaler enabled for VI layer
Hi,

On Thu, Jun 02, 2022 at 06:01:18PM +0000, Roman Stratiienko wrote:
> According to DE2.0/DE3.0 manual VI scaler enable register is double
> buffered, but de facto it doesn't, or the hardware has the shadow
> register latching issues which causes single-frame picture corruption
> after changing the state of scaler enable register.
>
> Allow the user to keep the scaler always enabled, preventing the UI
> glitches on the transition from scaled to unscaled state.
>
> NOTE:
> UI layer scaler has more registers with double-buffering issue and can't
> be workarounded in the same manner.
>
> You may find a python test and a demo video for this issue at [1]
>
> [1]: https://github.com/GloDroid/glodroid_tests/issues/4

Please describe the issue entirely here. The commit log must be self-sufficient.

> Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
> ---
> drivers/gpu/drm/sun4i/sun8i_mixer.c | 12 ++++++++++++
> drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 4 +++-
> 2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> index 71ab0a00b4de..15cad0330f66 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> @@ -27,6 +27,18 @@
> #include "sun8i_vi_layer.h"
> #include "sunxi_engine.h"
>
> +/* According to DE2.0/DE3.0 manual VI scaler enable register is double
> + * buffered, but de facto it doesn't, or the hardware has the shadow
> + * register latching issues which causes single-frame picture corruption
> + * after changing the state of scaler enable register.
> + * Allow the user to keep the scaler always enabled, preventing the UI
> + * glitches on the transition from scaled to unscaled state.
> + */
> +int sun8i_vi_keep_scaler_enabled;
> +MODULE_PARM_DESC(keep_vi_scaler_enabled,
> + "Keep VI scaler enabled (1 = enabled, 0 = disabled (default))");
> +module_param_named(keep_vi_scaler_enabled, sun8i_vi_keep_scaler_enabled, int, 0644);
> +

It's not clear to me why we would want to make that a parameter?

If it never works, we should fix it once and for all and not allow a broken setup at all.

Maxime

\
 
 \ /
  Last update: 2022-06-03 10:25    [W:0.076 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site