lkml.org 
[lkml]   [2022]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] drm/sun4i: sun8i: Add the ability to keep scaler enabled for VI layer
Hi Ondrej,

пт, 3 июн. 2022 г. в 00:55, Ondřej Jirman <megous@megous.com>:
>
> Hi Roman,
>
> On Thu, Jun 02, 2022 at 06:01:18PM +0000, Roman Stratiienko wrote:
> > According to DE2.0/DE3.0 manual VI scaler enable register is double
> > buffered, but de facto it doesn't, or the hardware has the shadow
> > register latching issues which causes single-frame picture corruption
> > after changing the state of scaler enable register.
> >
> > Allow the user to keep the scaler always enabled, preventing the UI
> > glitches on the transition from scaled to unscaled state.
> >
> > NOTE:
> > UI layer scaler has more registers with double-buffering issue and can't
> > be workarounded in the same manner.
> >
> > You may find a python test and a demo video for this issue at [1]
>
> Isn't this an issue with kernel driver not waiting for DE2 FINISH IRQ, but
> for VBLANK IRQ from TCON instead, before allowing to write new set of register
> values?

No, DE2 FINISH IRQ is triggered just some micro or even nanoseconds
earlier from vblank IRQ
(I have checked it using tracing).

I can guess MISSION FINISH IRQ triggered when the last line is being
sent to the line buffer cache (in between of the mixer output and tcon
input).
But VBLANG IRQ triggers when the last line is being sent to the
display + hfront porch time + hsync time.

I have also tried scheduling the register updates that have
double-buffering issues at VBLANK irq. And such a solution fixes the
test for both VI and UI scalers.
But under high loads there are still glitches happening. This patch
solves the issue for both test and high load conditions. (but for VI
only)
I'll post my solution with a deferred scaling register update soon.

>
> https://megous.com/dl/tmp/4fe35b3fc72ee7de.png
>
> I haven't checked if FINISH flag is set at time of VBLANK interrupt, so maybe
> this is not the issue.
>
> regards,
> o.
>
> > [1]: https://github.com/GloDroid/glodroid_tests/issues/4
> > Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
> > ---
> > drivers/gpu/drm/sun4i/sun8i_mixer.c | 12 ++++++++++++
> > drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 4 +++-
> > 2 files changed, 15 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > index 71ab0a00b4de..15cad0330f66 100644
> > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > @@ -27,6 +27,18 @@
> > #include "sun8i_vi_layer.h"
> > #include "sunxi_engine.h"
> >
> > +/* According to DE2.0/DE3.0 manual VI scaler enable register is double
> > + * buffered, but de facto it doesn't, or the hardware has the shadow
> > + * register latching issues which causes single-frame picture corruption
> > + * after changing the state of scaler enable register.
> > + * Allow the user to keep the scaler always enabled, preventing the UI
> > + * glitches on the transition from scaled to unscaled state.
> > + */
> > +int sun8i_vi_keep_scaler_enabled;
> > +MODULE_PARM_DESC(keep_vi_scaler_enabled,
> > + "Keep VI scaler enabled (1 = enabled, 0 = disabled (default))");
> > +module_param_named(keep_vi_scaler_enabled, sun8i_vi_keep_scaler_enabled, int, 0644);
> > +
> > struct de2_fmt_info {
> > u32 drm_fmt;
> > u32 de2_fmt;
> > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > index 662ba1018cc4..f005ab883503 100644
> > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > @@ -17,6 +17,8 @@
> > #include "sun8i_vi_layer.h"
> > #include "sun8i_vi_scaler.h"
> >
> > +extern int sun8i_vi_keep_scaler_enabled;
> > +
> > static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel,
> > int overlay, bool enable, unsigned int zpos)
> > {
> > @@ -149,7 +151,7 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel,
> > */
> > subsampled = format->hsub > 1 || format->vsub > 1;
> >
> > - if (insize != outsize || subsampled || hphase || vphase) {
> > + if (insize != outsize || subsampled || hphase || vphase || sun8i_vi_keep_scaler_enabled) {
> > unsigned int scanline, required;
> > struct drm_display_mode *mode;
> > u32 hscale, vscale, fps;
> > --
> > 2.30.2
> >

\
 
 \ /
  Last update: 2022-06-03 09:17    [W:0.085 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site