lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dmaengine: qcom: bam_dma: fix runtime PM underflow
Date
Commit dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled")
caused unbalanced pm_runtime_get/put() calls when the bam is
controlled remotely. This commit reverts it and just enables pm_runtime
in all cases, the clk_* functions already just nop the clock is NULL.

Also clean up a bit by removing unnecessary bamclk null checks.

Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---

Boot tested on a OnePlus 6

v1 can be found here:
https://lore.kernel.org/linux-arm-msm/20220609195043.1544625-1-caleb.connolly@linaro.org/

drivers/dma/qcom/bam_dma.c | 39 +++++++++++---------------------------
1 file changed, 11 insertions(+), 28 deletions(-)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 87f6ca1541cf..2ff787df513e 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -558,14 +558,6 @@ static int bam_alloc_chan(struct dma_chan *chan)
return 0;
}

-static int bam_pm_runtime_get_sync(struct device *dev)
-{
- if (pm_runtime_enabled(dev))
- return pm_runtime_get_sync(dev);
-
- return 0;
-}
-
/**
* bam_free_chan - Frees dma resources associated with specific channel
* @chan: specified channel
@@ -581,7 +573,7 @@ static void bam_free_chan(struct dma_chan *chan)
unsigned long flags;
int ret;

- ret = bam_pm_runtime_get_sync(bdev->dev);
+ ret = pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return;

@@ -784,7 +776,7 @@ static int bam_pause(struct dma_chan *chan)
unsigned long flag;
int ret;

- ret = bam_pm_runtime_get_sync(bdev->dev);
+ ret = pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;

@@ -810,7 +802,7 @@ static int bam_resume(struct dma_chan *chan)
unsigned long flag;
int ret;

- ret = bam_pm_runtime_get_sync(bdev->dev);
+ ret = pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;

@@ -919,7 +911,7 @@ static irqreturn_t bam_dma_irq(int irq, void *data)
if (srcs & P_IRQ)
tasklet_schedule(&bdev->task);

- ret = bam_pm_runtime_get_sync(bdev->dev);
+ ret = pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return IRQ_NONE;

@@ -1037,7 +1029,7 @@ static void bam_start_dma(struct bam_chan *bchan)
if (!vd)
return;

- ret = bam_pm_runtime_get_sync(bdev->dev);
+ ret = pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return;

@@ -1374,11 +1366,6 @@ static int bam_dma_probe(struct platform_device *pdev)
if (ret)
goto err_unregister_dma;

- if (!bdev->bamclk) {
- pm_runtime_disable(&pdev->dev);
- return 0;
- }
-
pm_runtime_irq_safe(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, BAM_DMA_AUTOSUSPEND_DELAY);
pm_runtime_use_autosuspend(&pdev->dev);
@@ -1462,10 +1449,8 @@ static int __maybe_unused bam_dma_suspend(struct device *dev)
{
struct bam_device *bdev = dev_get_drvdata(dev);

- if (bdev->bamclk) {
- pm_runtime_force_suspend(dev);
- clk_unprepare(bdev->bamclk);
- }
+ pm_runtime_force_suspend(dev);
+ clk_unprepare(bdev->bamclk);

return 0;
}
@@ -1475,13 +1460,11 @@ static int __maybe_unused bam_dma_resume(struct device *dev)
struct bam_device *bdev = dev_get_drvdata(dev);
int ret;

- if (bdev->bamclk) {
- ret = clk_prepare(bdev->bamclk);
- if (ret)
- return ret;
+ ret = clk_prepare(bdev->bamclk);
+ if (ret)
+ return ret;

- pm_runtime_force_resume(dev);
- }
+ pm_runtime_force_resume(dev);

return 0;
}
--
2.36.1
\
 
 \ /
  Last update: 2022-06-29 16:04    [W:0.034 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site