lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call
From


On 6/8/22 00:42, Tanmay Shah wrote:
> SGI interrupt register and reset is performed by EEMI ioctl
> IOCTL_REGISTER_SGI. However, this is not correct use of EEMI call.
> SGI registration functionality does not qualify as energy management
> activity and so shouldn't be mapped to EEMI call.
>
> This new call will replace IOCTL_REGISTER_SGI and will be handled by TF-A
> specific handler in TF-A. To maintain backward compatibility for a while
> firmware driver will still use IOCTL_REGISTER_SGI as fallback strategy if
> new call fails or is not supported by TF-A.
>
> This new design also helps to make TF-A as pass through layer for EEMI
> calls. So we don't have to maintain PM_IOCTL as EEMI API ID in TF-A.
>
> Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
> ---
>
> Changes in v2:
> - fix commit tag. add new line before signed-off tag
>
> drivers/firmware/xilinx/zynqmp.c | 16 +++++++++++++++-
> drivers/soc/xilinx/xlnx_event_manager.c | 5 ++---
> include/linux/firmware/xlnx-zynqmp.h | 7 +++++++
> 3 files changed, 24 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 7977a494a651..d1f652802181 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -2,7 +2,7 @@
> /*
> * Xilinx Zynq MPSoC Firmware layer
> *
> - * Copyright (C) 2014-2021 Xilinx, Inc.
> + * Copyright (C) 2014-2022 Xilinx, Inc.
> *
> * Michal Simek <michal.simek@xilinx.com>
> * Davorin Mista <davorin.mista@aggios.com>
> @@ -340,6 +340,20 @@ int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
> static u32 pm_api_version;
> static u32 pm_tz_version;
>
> +int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset)
> +{
> + int ret;
> +
> + ret = zynqmp_pm_invoke_fn(TF_A_PM_REGISTER_SGI, sgi_num, reset, 0, 0,
> + NULL);
> + if (!ret)
> + return ret;
> +
> + /* try old implementation as fallback strategy if above fails */
> + return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, sgi_num,
> + reset, NULL);
> +}
> +
> /**
> * zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
> * @version: Returned version value
> diff --git a/drivers/soc/xilinx/xlnx_event_manager.c b/drivers/soc/xilinx/xlnx_event_manager.c
> index 5dcb7665fe22..2de082765bef 100644
> --- a/drivers/soc/xilinx/xlnx_event_manager.c
> +++ b/drivers/soc/xilinx/xlnx_event_manager.c
> @@ -647,8 +647,7 @@ static int xlnx_event_manager_probe(struct platform_device *pdev)
> cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "soc/event:starting",
> xlnx_event_cpuhp_start, xlnx_event_cpuhp_down);
>
> - ret = zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, sgi_num,
> - 0, NULL);
> + ret = zynqmp_pm_register_sgi(sgi_num, 0);
> if (ret) {
> dev_err(&pdev->dev, "SGI %d Registration over TF-A failed with %d\n", sgi_num, ret);
> xlnx_event_cleanup_sgi(pdev);
> @@ -681,7 +680,7 @@ static int xlnx_event_manager_remove(struct platform_device *pdev)
> kfree(eve_data);
> }
>
> - ret = zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, 0, 1, NULL);
> + ret = zynqmp_pm_register_sgi(0, 1);
> if (ret)
> dev_err(&pdev->dev, "SGI unregistration over TF-A failed with %d\n", ret);
>
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 1ec73d5352c3..cbde3b1fa414 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -34,6 +34,7 @@
> #define PM_API_VERSION_2 2
>
> /* ATF only commands */
> +#define TF_A_PM_REGISTER_SGI 0xa04
> #define PM_GET_TRUSTZONE_VERSION 0xa03
> #define PM_SET_SUSPEND_MODE 0xa02
> #define GET_CALLBACK_DATA 0xa01
> @@ -468,6 +469,7 @@ int zynqmp_pm_feature(const u32 api_id);
> int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id);
> int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
> int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
> +int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset);
> #else
> static inline int zynqmp_pm_get_api_version(u32 *version)
> {
> @@ -733,6 +735,11 @@ static inline int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
> {
> return -ENODEV;
> }
> +
> +static inline int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset)
> +{
> + return -ENODEV;
> +}
> #endif
>
> #endif /* __FIRMWARE_ZYNQMP_H__ */
>
> base-commit: 73d0e32571a0786151eb72634f1a4c5891166176


Applied.
M

\
 
 \ /
  Last update: 2022-06-29 14:47    [W:0.242 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site