lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] ASoC: dt-bindings: Add WSA883x bindings
Date
This patch adds bindings for WSA883x Smart Speaker Amplifier.
This Amplifier also has a simple thermal sensor for temperature
measurments with speaker protection.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../bindings/sound/qcom,wsa883x.yaml | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
new file mode 100644
index 000000000000..6113f65f2990
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for The Qualcomm WSA8830/WSA8832/WSA8835
+ smart speaker amplifier
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ WSA883X is the Qualcomm Aqstic smart speaker amplifier
+ Their primary operating mode uses a SoundWire digital audio
+ interface. This binding is for SoundWire interface.
+
+properties:
+ compatible:
+ const: sdw10217020200
+
+ reg:
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO spec for Powerdown/Shutdown line to use
+ maxItems: 1
+
+ vdd-supply:
+ description: VDD Supply for the Codec
+
+ '#thermal-sensor-cells':
+ const: 0
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - powerdown-gpios
+ - "#thermal-sensor-cells"
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ soundwire-controller@3250000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x3250000 0x2000>;
+
+ speaker@0,1 {
+ compatible = "sdw10217020200";
+ reg = <0 1>;
+ powerdown-gpios = <&tlmm 1 0>;
+ vdd-supply = <&vreg_s10b_1p8>;
+ #thermal-sensor-cells = <0>;
+ #sound-dai-cells = <0>;
+ };
+
+ speaker@0,2 {
+ compatible = "sdw10217020200";
+ reg = <0 2>;
+ powerdown-gpios = <&tlmm 89 0>;
+ vdd-supply = <&vreg_s10b_1p8>;
+ #thermal-sensor-cells = <0>;
+ #sound-dai-cells = <0>;
+ };
+ };
+
+...
--
2.25.1
\
 
 \ /
  Last update: 2022-06-29 11:08    [W:0.412 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site