lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] serial: 8250: dw: Fix NULL pointer dereference
Hi,

Does cd16044d7c38 ("serial: 8250: dw: enable using pdata with ACPI") work
for you? (Currently in tty-linus branch).

--
i.


On Tue, 28 Jun 2022, Jeremy Linton wrote:

> Similarly to e6a08c6949cb, ACPI machines don't have
> a pdata setup, leading to a null pointer dereference
> when dw8250_handle_irq runs.
>
> Fixes: aa63d786cea2 ("serial: 8250: dw: Add support for DMA flow controlling devices")
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
> drivers/tty/serial/8250/8250_dw.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 53e488beb8c2..06f80090cbb9 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -237,10 +237,13 @@ static int dw8250_handle_irq(struct uart_port *p)
> struct dw8250_data *d = to_dw8250_data(p->private_data);
> unsigned int iir = p->serial_in(p, UART_IIR);
> bool rx_timeout = (iir & 0x3f) == UART_IIR_RX_TIMEOUT;
> - unsigned int quirks = d->pdata->quirks;
> + unsigned int quirks = 0;
> unsigned int status;
> unsigned long flags;
>
> + if (d->pdata)
> + quirks = d->pdata->quirks;
> +
> /*
> * There are ways to get Designware-based UARTs into a state where
> * they are asserting UART_IIR_RX_TIMEOUT but there is no actual
>

\
 
 \ /
  Last update: 2022-06-29 10:01    [W:0.077 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site