lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] arm64: dts: qcom: sdm845: Enable user LEDs on DB845c
On Mon 30 May 02:06 CDT 2022, Pavel Machek wrote:

> Hi!
>
> > The DB845c has 4 "user LEDs", the last one is already supported as it's
> > just wired to a gpio. Now that the LPG binding is in place we can wire
> > up the other 3 LEDs as well.
>
>
> > +&pmi8998_lpg {
> > + status = "okay";
> > +
> > + qcom,power-source = <1>;
> > +
> > + led@3 {
> > + reg = <3>;
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_HEARTBEAT;
> > + function-enumerator = <3>;
> > +
> > + linux,default-trigger = "heartbeat";
> > + default-state = "on";
> > + };
> > +
> > + led@4 {
> > + reg = <4>;
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_INDICATOR;
> > + function-enumerator = <2>;
> > + };
> > +
> > + led@5 {
> > + reg = <5>;
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_INDICATOR;
> > + function-enumerator = <1>;
> > + };
>
> Do the LEDs have some kind of markings? Marking them as "indicator" is not too useful.
>

Unfortunately no, there is just 4 green LEDs tightly packed together (3
driven by the lpg, 1 by a gpio), with no indications of which is which.

Regards,
Bjorn

\
 
 \ /
  Last update: 2022-06-30 05:56    [W:0.053 / U:2.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site