lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 1/2] dt-bindings: iio: adc: add AD4130
From


On 6/28/22 16:47, Rob Herring wrote:
> On Mon, Jun 20, 2022 at 07:20:58PM +0300, Cosmin Tanislav wrote:
>> AD4130-8 is an ultra-low power, high precision, measurement solution for
>> low bandwidth battery operated applications.
>>
>> The fully integrated AFE (Analog Front-End) includes a multiplexer for up
>> to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
>> Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
>> selectable filter options, smart sequencer, sensor biasing and excitation
>> options, diagnostics, and a FIFO buffer.
>>
>> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
>> ---
>> .../bindings/iio/adc/adi,ad4130.yaml | 259 ++++++++++++++++++
>> 1 file changed, 259 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
>> new file mode 100644
>> index 000000000000..b72f3da07309
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
>> @@ -0,0 +1,259 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +# Copyright 2022 Analog Devices Inc.
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Analog Devices AD4130 ADC device driver
>> +
>> +maintainers:
>> + - Cosmin Tanislav <cosmin.tanislav@analog.com>
>> +
>> +description: |
>> + Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here:
>> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - adi,ad4130
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> + description: phandle to the master clock (mclk)
>> +
>> + clock-names:
>> + items:
>> + - const: mclk
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + interrupt-names:
>> + description: |
>> + Specify which interrupt pin should be configured as Data Ready / FIFO
>> + interrupt.
>> + Default if not supplied is int.
>> + enum:
>> + - int
>> + - clk
>> + - p2
>> + - dout
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + refin1-supply:
>> + description: refin1 supply. Can be used as reference for conversion.
>> +
>> + refin2-supply:
>> + description: refin2 supply. Can be used as reference for conversion.
>> +
>> + avdd-supply:
>> + description: AVDD voltage supply. Can be used as reference for conversion.
>> +
>> + iovdd-supply:
>> + description: IOVDD voltage supply. Used for the chip interface.
>> +
>> + spi-max-frequency:
>> + maximum: 5000000
>> +
>> + adi,int-clk-out:
>> + description: Specify if the internal clock should be exposed on the CLK pin.
>> + type: boolean
>> +
>> + adi,ext-clk-freq-hz:
>> + description: Specify the frequency of the external clock.
>> + enum: [76800, 153600]
>> + default: 76800
>> +
>> + adi,bipolar:
>> + description: Specify if the device should be used in bipolar mode.
>> + type: boolean
>> +
>> + adi,vbias-pins:
>> + description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + maxItems: 16
>> + items:
>> + minimum: 0
>> + maximum: 15
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> +
>> +patternProperties:
>> + "^channel@([0-9]|1[0-5])$":
>
> Normally, unit-addresses are in hex.


Righhhht. Sorry about that.

There are other offenders from us too.

❯ rg -F "^channel@([0-9]|1[0-5])\$"
Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
49: "^channel@([0-9]|1[0-5])$":

Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
65: "^channel@([0-9]|1[0-5])$":

Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
73: "^channel@([0-9]|1[0-5])$":

>
>> + type: object
>> + $ref: adc.yaml
>> + unevaluatedProperties: false
>> +
>> + properties:
>> + reg:
>> + description: The channel number.
>> + minimum: 0
>> + maximum: 15
>> +
>> + diff-channels:
>> + description: |
>> + Besides the analog inputs available, internal inputs can be used.
>> + 16: Internal temperature sensor.
>> + 17: AVSS
>> + 18: Internal reference
>> + 19: DGND
>> + 20: (AVDD − AVSS)/6+
>> + 21: (AVDD − AVSS)/6-
>> + 22: (IOVDD − DGND)/6+
>> + 23: (IOVDD − DGND)/6-
>> + 24: (ALDO − AVSS)/6+
>> + 25: (ALDO − AVSS)/6-
>> + 26: (DLDO − DGND)/6+
>> + 27: (DLDO − DGND)/6-
>> + 28: V_MV_P
>> + 29: V_MV_M
>> + items:
>> + minimum: 0
>> + maximum: 29
>> +
>> + adi,reference-select:
>> + description: |
>> + Select the reference source to use when converting on the
>> + specific channel. Valid values are:
>> + 0: REFIN1(+)/REFIN1(−)
>> + 1: REFIN2(+)/REFIN2(−)
>> + 2: REFOUT/AVSS (Internal reference)
>> + 3: AVDD/AVSS
>> + If not specified, REFIN1 is used.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [0, 1, 2, 3]
>> + default: 0
>> +
>> + adi,excitation-pin-0:
>> + description: |
>> + Analog input to apply excitation current to while the channel
>> + is active.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + minimum: 0
>> + maximum: 15
>> + default: 0
>> +
>> + adi,excitation-pin-1:
>> + description: |
>> + Analog input to apply excitation current to while this channel
>> + is active.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + minimum: 0
>> + maximum: 15
>> + default: 0
>> +
>> + adi,excitation-current-0-nanoamp:
>
> This needs a new unit suffix added to dtschema.
>
>> + description: |
>> + Excitation current in nanoamps to be applied to pin specified in
>> + adi,excitation-pin-0 while this channel is active.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
>> + default: 0
>> +
>> + adi,excitation-current-1-nanoamp:
>> + description: |
>> + Excitation current in nanoamps to be applied to pin specified in
>> + adi,excitation-pin-1 while this channel is active.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
>> + default: 0
>> +
>> + adi,burnout-current-nanoamp:
>> + description: |
>> + Burnout current in nanoamps to be applied for this channel.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [0, 500, 2000, 4000]
>> + default: 0
>> +
>> + adi,buffered-positive:
>> + description: Enable buffered mode for positive input.
>> + type: boolean
>> +
>> + adi,buffered-negative:
>> + description: Enable buffered mode for negative input.
>> + type: boolean
>> +
>> + required:
>> + - reg
>> + - diff-channels
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> + spi {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + adc@0 {
>> + compatible = "adi,ad4130";
>> + reg = <0>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + spi-max-frequency = <5000000>;
>> + interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
>> + interrupt-parent = <&gpio>;
>> +
>> + channel@0 {
>> + reg = <0>;
>> +
>> + adi,reference-select = <2>;
>> +
>> + /* AIN8, AIN9 */
>> + diff-channels = <8 9>;
>> + };
>> +
>> + channel@1 {
>> + reg = <1>;
>> +
>> + adi,reference-select = <2>;
>> +
>> + /* AIN10, AIN11 */
>> + diff-channels = <10 11>;
>> + };
>> +
>> + channel@2 {
>> + reg = <2>;
>> +
>> + adi,reference-select = <2>;
>> +
>> + /* Temperature Sensor, DGND */
>> + diff-channels = <16 19>;
>> + };
>> +
>> + channel@3 {
>> + reg = <3>;
>> +
>> + adi,reference-select = <2>;
>> +
>> + /* Internal reference, DGND */
>> + diff-channels = <18 19>;
>> + };
>> +
>> + channel@4 {
>> + reg = <4>;
>> +
>> + adi,reference-select = <2>;
>> +
>> + /* DGND, DGND */
>> + diff-channels = <19 19>;
>> + };
>> + };
>> + };
>> --
>> 2.36.1
>>
>>

\
 
 \ /
  Last update: 2022-06-28 16:32    [W:0.051 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site