lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 3/9] dt-bindings: reset: intel,rcu-gw: Update bindings for "legacy" SoCs
Date
The Lantiq Amazon-SE, Danube, xRX100 and xRX200 SoCs have up to two USB2
PHYs which are part of the RCU register space. The RCU registers on
these SoCs are using big endian. Update the binding for these SoCs to
properly describe this IP:
- Add compatible strings for Amazon-SE, Danube and xRX100
- Rename the xRX200 compatible string (which is not used anywhere) and
switch to the one previously documented in mips/lantiq/rcu.txt
- Allow usage of "simple-mfd" and "syscon" in the compatible string so the
child devices (USB2 PHYs) can be described
- Allow #address-cells and #size-cells to be set to 1 for describing the
child devices (USB2 PHYs)
- #reset-cells must always be 3 (offset, reset bit and status bit) on the
legacy SoCs while LGM uses a fixed value of 2 (offset and reset bit -
status bit is always identical to the reset bit).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../bindings/reset/intel,rcu-gw.yaml | 84 +++++++++++++++++--
1 file changed, 79 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index be64f8597710..b90913c7b7d3 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -11,9 +11,16 @@ maintainers:

properties:
compatible:
- enum:
- - intel,rcu-lgm
- - intel,rcu-xrx200
+ oneOf:
+ - items:
+ - enum:
+ - lantiq,ase-rcu
+ - lantiq,danube-rcu
+ - lantiq,xrx100-rcu
+ - lantiq,xrx200-rcu
+ - const: simple-mfd
+ - const: syscon
+ - const: intel,rcu-lgm

reg:
description: Reset controller registers.
@@ -33,8 +40,6 @@ properties:
maximum: 31

"#reset-cells":
- minimum: 2
- maximum: 3
description: |
First cell is reset request register offset.
Second cell is bit offset in reset request register.
@@ -43,6 +48,43 @@ properties:
reset request and reset status registers is same. Whereas
3 for legacy SoCs as bit offset differs.

+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ big-endian: true
+
+patternProperties:
+ "^usb2-phy@[0-9a-f]+$":
+ type: object
+ $ref: "../phy/lantiq,xway-rcu-usb2-phy.yaml"
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: intel,rcu-lgm
+ then:
+ properties:
+ "#reset-cells":
+ const: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - lantiq,ase-rcu
+ - lantiq,danube-rcu
+ - lantiq,xrx100-rcu
+ - lantiq,xrx200-rcu
+ then:
+ properties:
+ "#reset-cells":
+ const: 3
+
required:
- compatible
- reg
@@ -67,3 +109,35 @@ examples:
#pwm-cells = <2>;
resets = <&rcu0 0x30 21>;
};
+ - |
+ rcu_xrx200: rcu@203000 {
+ compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
+ reg = <0x203000 0x100>;
+ big-endian;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ #reset-cells = <3>;
+ intel,global-reset = <0x10 30 29>;
+
+ usb_phy0: usb2-phy@18 {
+ compatible = "lantiq,xrx200-usb2-phy";
+ reg = <0x18 4>, <0x38 4>;
+ status = "disabled";
+
+ resets = <&rcu_xrx200 0x48 4 4>, <&rcu_xrx200 0x10 4 4>;
+ reset-names = "phy", "ctrl";
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: usb2-phy@34 {
+ compatible = "lantiq,xrx200-usb2-phy";
+ reg = <0x34 4>, <0x3c 4>;
+ status = "disabled";
+
+ resets = <&rcu_xrx200 0x48 5 5>, <&rcu_xrx200 0x10 4 4>;
+ reset-names = "phy", "ctrl";
+ #phy-cells = <0>;
+ };
+ };
--
2.36.1
\
 
 \ /
  Last update: 2022-06-28 14:46    [W:0.175 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site