lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] serial: mvebu: Apply old baudrate to termios
On Tuesday 28 June 2022 11:51:36 Pali Rohár wrote:
> On Tuesday 28 June 2022 12:41:55 Ilpo Järvinen wrote:
> > A fallback baud rate was derived from old termios but got never applied
> > to (new/current) termios. Old termios is dropped once ->set_termios()
> > call chain completes, only termios persists the values. Encode also the
> > old baud rate into termios.
> >
> > Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
> > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
>
> Hello! Could you explain a bit more what is this patch fixing? I have
> not caught it yet. Do you have a test scenario which can demonstrate
> this issue? Because I have tested this driver more deeply (on Mox
> and Espressobin) and I have not seen any remaining issue with reporting
> incorrect baudrate.

Ou, now I see where is the issue. Patch which I tested and which fixes
reporting baudrate is not in kernel tree yet and it looks like I totally
forgot to sent it to ML. I will send it. Sorry for confusion.

> > ---
> > drivers/tty/serial/mvebu-uart.c | 5 ++---
> > 1 file changed, 2 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
> > index 0429c2a54290..12a79018697f 100644
> > --- a/drivers/tty/serial/mvebu-uart.c
> > +++ b/drivers/tty/serial/mvebu-uart.c
> > @@ -592,10 +592,9 @@ static void mvebu_uart_set_termios(struct uart_port *port,
> > if (old)
> > baud = uart_get_baud_rate(port, old, NULL,
> > min_baud, max_baud);
> > - } else {
> > - tty_termios_encode_baud_rate(termios, baud, baud);
> > - uart_update_timeout(port, termios->c_cflag, baud);
> > }
> > + tty_termios_encode_baud_rate(termios, baud, baud);
> > + uart_update_timeout(port, termios->c_cflag, baud);
> >
> > /* Only the following flag changes are supported */
> > if (old) {
> >
> > --
> > tg: (f287f971e256..) fix/mvebu-apply-old-baud (depends on: tty-next)

\
 
 \ /
  Last update: 2022-06-28 12:01    [W:0.097 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site