lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] serial: mvebu: Apply old baudrate to termios
On Tuesday 28 June 2022 12:41:55 Ilpo Järvinen wrote:
> A fallback baud rate was derived from old termios but got never applied
> to (new/current) termios. Old termios is dropped once ->set_termios()
> call chain completes, only termios persists the values. Encode also the
> old baud rate into termios.
>
> Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Hello! Could you explain a bit more what is this patch fixing? I have
not caught it yet. Do you have a test scenario which can demonstrate
this issue? Because I have tested this driver more deeply (on Mox
and Espressobin) and I have not seen any remaining issue with reporting
incorrect baudrate.

> ---
> drivers/tty/serial/mvebu-uart.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
> index 0429c2a54290..12a79018697f 100644
> --- a/drivers/tty/serial/mvebu-uart.c
> +++ b/drivers/tty/serial/mvebu-uart.c
> @@ -592,10 +592,9 @@ static void mvebu_uart_set_termios(struct uart_port *port,
> if (old)
> baud = uart_get_baud_rate(port, old, NULL,
> min_baud, max_baud);
> - } else {
> - tty_termios_encode_baud_rate(termios, baud, baud);
> - uart_update_timeout(port, termios->c_cflag, baud);
> }
> + tty_termios_encode_baud_rate(termios, baud, baud);
> + uart_update_timeout(port, termios->c_cflag, baud);
>
> /* Only the following flag changes are supported */
> if (old) {
>
> --
> tg: (f287f971e256..) fix/mvebu-apply-old-baud (depends on: tty-next)

\
 
 \ /
  Last update: 2022-06-28 11:52    [W:0.047 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site