lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH RESEND tty-next] serial: 8250_dw: Take port lock while accessing LSR
Accessing LSR requires port lock because it mutates lsr_saved_flags
in serial_lsr_in().

Fixes: 197eb5c416ff ("serial: 8250_dw: Use serial_lsr_in() in dw8250_handle_irq()")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

---
I'll resend the third patch later.

drivers/tty/serial/8250/8250_dw.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 167a691c7b19..f78b13db1b1e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -266,7 +266,10 @@ static int dw8250_handle_irq(struct uart_port *p)

/* Manually stop the Rx DMA transfer when acting as flow controller */
if (quirks & DW_UART_QUIRK_IS_DMA_FC && up->dma && up->dma->rx_running && rx_timeout) {
+ spin_lock_irqsave(&p->lock, flags);
status = serial_lsr_in(up);
+ spin_unlock_irqrestore(&p->lock, flags);
+
if (status & (UART_LSR_DR | UART_LSR_BI)) {
dw8250_writel_ext(p, RZN1_UART_RDMACR, 0);
dw8250_writel_ext(p, DW_UART_DMASA, 1);
--
tg: (f55d2e4b0a47..) dw/use-spinlock (depends on: 8250/fix-stop_tx-race)
\
 
 \ /
  Last update: 2022-06-28 11:03    [W:0.108 / U:1.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site