lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v11 net-next 4/9] pinctrl: ocelot: add ability to be used in a non-mmio configuration
    Date
    There are a few Ocelot chips that contain pinctrl logic, but can be
    controlled externally. Specifically the VSC7511, 7512, 7513 and 7514. In
    the externally controlled configurations these registers are not
    memory-mapped.

    Add support for these non-memory-mapped configurations.

    Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
    ---
    drivers/pinctrl/pinctrl-ocelot.c | 11 ++++-------
    1 file changed, 4 insertions(+), 7 deletions(-)

    diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
    index 5554c3014448..655bada7cc4b 100644
    --- a/drivers/pinctrl/pinctrl-ocelot.c
    +++ b/drivers/pinctrl/pinctrl-ocelot.c
    @@ -10,6 +10,7 @@
    #include <linux/gpio/driver.h>
    #include <linux/interrupt.h>
    #include <linux/io.h>
    +#include <linux/mfd/ocelot.h>
    #include <linux/of_device.h>
    #include <linux/of_irq.h>
    #include <linux/of_platform.h>
    @@ -1918,7 +1919,6 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
    struct ocelot_pinctrl *info;
    struct reset_control *reset;
    struct regmap *pincfg;
    - void __iomem *base;
    int ret;
    struct regmap_config regmap_config = {
    .reg_bits = 32,
    @@ -1938,16 +1938,12 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
    "Failed to get reset\n");
    reset_control_reset(reset);

    - base = devm_ioremap_resource(dev,
    - platform_get_resource(pdev, IORESOURCE_MEM, 0));
    - if (IS_ERR(base))
    - return PTR_ERR(base);
    -
    info->stride = 1 + (info->desc->npins - 1) / 32;

    regmap_config.max_register = OCELOT_GPIO_SD_MAP * info->stride + 15 * 4;

    - info->map = devm_regmap_init_mmio(dev, base, &regmap_config);
    + info->map = ocelot_platform_init_regmap_from_resource(pdev, 0,
    + &regmap_config);
    if (IS_ERR(info->map)) {
    dev_err(dev, "Failed to create regmap\n");
    return PTR_ERR(info->map);
    @@ -1989,3 +1985,4 @@ builtin_platform_driver(ocelot_pinctrl_driver);

    MODULE_DESCRIPTION("Ocelot Chip Pinctrl Driver");
    MODULE_LICENSE("Dual MIT/GPL");
    +MODULE_IMPORT_NS(MFD_OCELOT);
    --
    2.25.1
    \
     
     \ /
      Last update: 2022-06-28 10:21    [W:3.523 / U:0.140 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site