lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 07/12] can: slcan: set bitrate by CAN device driver API
Date
It allows to set the bitrate via ip tool, as it happens for the other
CAN device drivers. It still remains possible to set the bitrate via
slcand or slcan_attach utilities. In case the ip tool is used, the
driver will send the serial command to the adapter.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

(no changes since v4)

Changes in v4:
- Use CAN_BITRATE_UNSET (0) and CAN_BITRATE_UNKNOWN (-1U) macros.
- Don't reset the bitrate in ndo_stop() if it has been configured.

Changes in v3:
- Remove the slc_do_set_bittiming().
- Set the bitrate in the ndo_open().
- Replace -1UL with -1U in setting a fake value for the bitrate.

Changes in v2:
- Use the CAN framework support for setting fixed bit rates.

drivers/net/can/slcan.c | 41 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index dfccf8d6c9a5..74033e2d7097 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -104,6 +104,11 @@ struct slcan {

static struct net_device **slcan_devs;

+static const u32 slcan_bitrate_const[] = {
+ 10000, 20000, 50000, 100000, 125000,
+ 250000, 500000, 800000, 1000000
+};
+
/************************************************************************
* SLCAN ENCAPSULATION FORMAT *
************************************************************************/
@@ -439,6 +444,9 @@ static int slc_close(struct net_device *dev)
netif_stop_queue(dev);
close_candev(dev);
sl->can.state = CAN_STATE_STOPPED;
+ if (sl->can.bittiming.bitrate == CAN_BITRATE_UNKNOWN)
+ sl->can.bittiming.bitrate = CAN_BITRATE_UNSET;
+
sl->rcount = 0;
sl->xleft = 0;
spin_unlock_bh(&sl->lock);
@@ -450,7 +458,8 @@ static int slc_close(struct net_device *dev)
static int slc_open(struct net_device *dev)
{
struct slcan *sl = netdev_priv(dev);
- int err;
+ unsigned char cmd[SLC_MTU];
+ int err, s;

if (sl->tty == NULL)
return -ENODEV;
@@ -460,15 +469,39 @@ static int slc_open(struct net_device *dev)
* can.bittiming.bitrate is CAN_BITRATE_UNSET (0), causing
* open_candev() to fail. So let's set to a fake value.
*/
- sl->can.bittiming.bitrate = CAN_BITRATE_UNKNOWN;
+ if (sl->can.bittiming.bitrate == CAN_BITRATE_UNSET)
+ sl->can.bittiming.bitrate = CAN_BITRATE_UNKNOWN;
+
err = open_candev(dev);
if (err) {
netdev_err(dev, "failed to open can device\n");
return err;
}

- sl->can.state = CAN_STATE_ERROR_ACTIVE;
sl->flags &= BIT(SLF_INUSE);
+
+ if (sl->can.bittiming.bitrate != CAN_BITRATE_UNKNOWN) {
+ for (s = 0; s < ARRAY_SIZE(slcan_bitrate_const); s++) {
+ if (sl->can.bittiming.bitrate == slcan_bitrate_const[s])
+ break;
+ }
+
+ /* The CAN framework has already validate the bitrate value,
+ * so we can avoid to check if `s' has been properly set.
+ */
+
+ snprintf(cmd, sizeof(cmd), "C\rS%d\r", s);
+ err = slcan_transmit_cmd(sl, cmd);
+ if (err) {
+ netdev_err(dev,
+ "failed to send bitrate command 'C\\rS%d\\r'\n",
+ s);
+ close_candev(dev);
+ return err;
+ }
+ }
+
+ sl->can.state = CAN_STATE_ERROR_ACTIVE;
netif_start_queue(dev);
return 0;
}
@@ -581,6 +614,8 @@ static struct slcan *slc_alloc(void)
/* Initialize channel control data */
sl->magic = SLCAN_MAGIC;
sl->dev = dev;
+ sl->can.bitrate_const = slcan_bitrate_const;
+ sl->can.bitrate_const_cnt = ARRAY_SIZE(slcan_bitrate_const);
spin_lock_init(&sl->lock);
INIT_WORK(&sl->tx_work, slcan_transmit);
init_waitqueue_head(&sl->xcmd_wait);
--
2.32.0
\
 
 \ /
  Last update: 2022-06-28 18:37    [W:0.071 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site