lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 net-next 4/4] time64.h: consolidate uses of PSEC_PER_NSEC
Date
Time-sensitive networking code needs to work with PTP times expressed in
nanoseconds, and with packet transmission times expressed in
picoseconds, since those would be fractional at higher than gigabit
speed when expressed in nanoseconds.

Convert the existing uses in tc-taprio and the ocelot/felix DSA driver
to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h
as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h
because the vDSO library does not (yet) need/use it.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v1->v2:
- move PSEC_PER_NSEC to include/linux/time64.h
- add missing include of linux/time.h

drivers/net/dsa/ocelot/felix_vsc9959.c | 5 +++--
include/linux/time64.h | 3 +++
net/sched/sch_taprio.c | 5 +++--
3 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 27d8b56cc21c..28bd4892c30a 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -16,6 +16,7 @@
#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/pci.h>
+#include <linux/time.h>
#include "felix.h"

#define VSC9959_NUM_PORTS 6
@@ -1235,7 +1236,7 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port)
u32 max_sdu;

if (min_gate_len[tc] == U64_MAX /* Gate always open */ ||
- min_gate_len[tc] * 1000 > needed_bit_time_ps) {
+ min_gate_len[tc] * PSEC_PER_NSEC > needed_bit_time_ps) {
/* Setting QMAXSDU_CFG to 0 disables oversized frame
* dropping.
*/
@@ -1249,7 +1250,7 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port)
* frame, make sure to enable oversize frame dropping
* for frames larger than the smallest that would fit.
*/
- max_sdu = div_u64(min_gate_len[tc] * 1000,
+ max_sdu = div_u64(min_gate_len[tc] * PSEC_PER_NSEC,
picos_per_byte);
/* A TC gate may be completely closed, which is a
* special case where all packets are oversized.
diff --git a/include/linux/time64.h b/include/linux/time64.h
index 81b9686a2079..2fb8232cff1d 100644
--- a/include/linux/time64.h
+++ b/include/linux/time64.h
@@ -20,6 +20,9 @@ struct itimerspec64 {
struct timespec64 it_value;
};

+/* Parameters used to convert the timespec values: */
+#define PSEC_PER_NSEC 1000L
+
/* Located here for timespec[64]_valid_strict */
#define TIME64_MAX ((s64)~((u64)1 << 63))
#define TIME64_MIN (-TIME64_MAX - 1)
diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index b9c71a304d39..0b941dd63d26 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/rcupdate.h>
+#include <linux/time.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <net/pkt_cls.h>
@@ -176,7 +177,7 @@ static ktime_t get_interval_end_time(struct sched_gate_list *sched,

static int length_to_duration(struct taprio_sched *q, int len)
{
- return div_u64(len * atomic64_read(&q->picos_per_byte), 1000);
+ return div_u64(len * atomic64_read(&q->picos_per_byte), PSEC_PER_NSEC);
}

/* Returns the entry corresponding to next available interval. If
@@ -551,7 +552,7 @@ static struct sk_buff *taprio_peek(struct Qdisc *sch)
static void taprio_set_budget(struct taprio_sched *q, struct sched_entry *entry)
{
atomic_set(&entry->budget,
- div64_u64((u64)entry->interval * 1000,
+ div64_u64((u64)entry->interval * PSEC_PER_NSEC,
atomic64_read(&q->picos_per_byte)));
}

--
2.25.1
\
 
 \ /
  Last update: 2022-06-28 16:55    [W:0.047 / U:17.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site