lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 069/135] ice: ethtool: advertise 1000M speeds properly
Date
From: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>

[ Upstream commit c3d184c83ff4b80167e34edfc3d21df424bf27ff ]

In current implementation ice_update_phy_type enables all link modes
for selected speed. This approach doesn't work for 1000M speeds,
because both copper (1000baseT) and optical (1000baseX) standards
cannot be enabled at once.

Fix this, by adding the function `ice_set_phy_type_from_speed()`
for 1000M speeds.

Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 39 +++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 19f115402969..982db894754f 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2150,6 +2150,42 @@ ice_setup_autoneg(struct ice_port_info *p, struct ethtool_link_ksettings *ks,
return err;
}

+/**
+ * ice_set_phy_type_from_speed - set phy_types based on speeds
+ * and advertised modes
+ * @ks: ethtool link ksettings struct
+ * @phy_type_low: pointer to the lower part of phy_type
+ * @phy_type_high: pointer to the higher part of phy_type
+ * @adv_link_speed: targeted link speeds bitmap
+ */
+static void
+ice_set_phy_type_from_speed(const struct ethtool_link_ksettings *ks,
+ u64 *phy_type_low, u64 *phy_type_high,
+ u16 adv_link_speed)
+{
+ /* Handle 1000M speed in a special way because ice_update_phy_type
+ * enables all link modes, but having mixed copper and optical
+ * standards is not supported.
+ */
+ adv_link_speed &= ~ICE_AQ_LINK_SPEED_1000MB;
+
+ if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+ 1000baseT_Full))
+ *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_T |
+ ICE_PHY_TYPE_LOW_1G_SGMII;
+
+ if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+ 1000baseKX_Full))
+ *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_KX;
+
+ if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+ 1000baseX_Full))
+ *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_SX |
+ ICE_PHY_TYPE_LOW_1000BASE_LX;
+
+ ice_update_phy_type(phy_type_low, phy_type_high, adv_link_speed);
+}
+
/**
* ice_set_link_ksettings - Set Speed and Duplex
* @netdev: network interface device structure
@@ -2286,7 +2322,8 @@ ice_set_link_ksettings(struct net_device *netdev,
adv_link_speed = curr_link_speed;

/* Convert the advertise link speeds to their corresponded PHY_TYPE */
- ice_update_phy_type(&phy_type_low, &phy_type_high, adv_link_speed);
+ ice_set_phy_type_from_speed(ks, &phy_type_low, &phy_type_high,
+ adv_link_speed);

if (!autoneg_changed && adv_link_speed == curr_link_speed) {
netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");
--
2.35.1


\
 
 \ /
  Last update: 2022-06-27 13:41    [W:0.427 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site