lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] dt-bindings: net: wireless: ath11k: add new DT entry for board ID
On Mon, 27 Jun 2022 at 12:27, Kalle Valo <kvalo@kernel.org> wrote:
>
> Robert Marko <robimarko@gmail.com> writes:
>
> > bus + qmi-chip-id + qmi-board-id and optionally the variant are currently
> > used for identifying the correct board data file.
> >
> > This however is sometimes not enough as all of the IPQ8074 boards that I
> > have access to dont have the qmi-board-id properly fused and simply return
> > the default value of 0xFF.
> >
> > So, to provide the correct qmi-board-id add a new DT property that allows
> > the qmi-board-id to be overridden from DTS in cases where its not set.
> > This is what vendors have been doing in the stock firmwares that were
> > shipped on boards I have.
>
> What's wrong with using 0xff? Ie. something like this:
>
> bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=foo
>
> Or maybe even just skip qmi-board-id entirely if it's not supported? So
> that the board file string would be something like:
>
> bus=ahb,qmi-chip-id=0,variant=foo
>
> I really would like to avoid adding more DT properties unless it's
> absolutely critical.

Well, I suppose that due to the variant property we can avoid "correcting" the
qmi-board-id

Regards,
Robert
>
> --
> https://patchwork.kernel.org/project/linux-wireless/list/
>
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2022-06-27 12:32    [W:0.085 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site