lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v14 01/15] dt-bindings: mediatek,dpi: Add DP_INTF compatible
From
Date
On Mon, 2022-06-27 at 15:50 +0800, CK Hu wrote:
> Hi, Bo-Chen:
>
> On Fri, 2022-06-24 at 11:09 +0800, Bo-Chen Chen wrote:
> > From: Markus Schneider-Pargmann <msp@baylibre.com>
> >
> > DP_INTF is similar to DPI but does not have the exact same feature
> > set
> > or register layouts.
> >
> > DP_INTF is the sink of the display pipeline that is connected to
> > the
> > DisplayPort controller and encoder unit. It takes the same clocks
> > as
> > DPI.
> >
> > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > [Bo-Chen: Modify reviewers' comments.]
>
> Except this line,
>
> Reviewed-by: CK Hu <ck.hu@mediatek.com>
>

Hello CK,

What do you mean?
Do you mean I should drop this line?

BRs,
Bo-Chen
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > ---
> > .../bindings/display/mediatek/mediatek,dpi.yaml | 11 ++++++-
> > --
> > --
> > 1 file changed, 6 insertions(+), 5 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > index 77ee1b923991..8e526a4b134e 100644
> > ---
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > +++
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.y
> > am
> > l
> > @@ -4,16 +4,16 @@
> > $id:
> > http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
> > $schema: http://devicetree.org/meta-schemas/core.yaml#
> >
> > -title: mediatek DPI Controller Device Tree Bindings
> > +title: mediatek DPI and DP_INTF Controller
> >
> > maintainers:
> > - CK Hu <ck.hu@mediatek.com>
> > - Jitao shi <jitao.shi@mediatek.com>
> >
> > description: |
> > - The Mediatek DPI function block is a sink of the display
> > subsystem
> > and
> > - provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
> > parallel
> > - output bus.
> > + The Mediatek DPI and DP_INTF function blocks are a sink of the
> > display
> > + subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422
> > pixel data on a
> > + parallel output bus.
> >
> > properties:
> > compatible:
> > @@ -24,6 +24,7 @@ properties:
> > - mediatek,mt8183-dpi
> > - mediatek,mt8186-dpi
> > - mediatek,mt8192-dpi
> > + - mediatek,mt8195-dp-intf
> >
> > reg:
> > maxItems: 1
> > @@ -55,7 +56,7 @@ properties:
> > $ref: /schemas/graph.yaml#/properties/port
> > description:
> > Output port node. This port should be connected to the input
> > port of an
> > - attached HDMI or LVDS encoder chip.
> > + attached HDMI, LVDS or DisplayPort encoder chip.
> >
> > required:
> > - compatible
>
>

\
 
 \ /
  Last update: 2022-06-27 11:08    [W:0.116 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site