lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon: (asus-ec-sensors) add support for Maximus XI Hero
Date
From: Michael Carns <mike@carns.com>

Add definitions for ROG MAXIMUS XI HERO and ROG MAXIMUS XI HERO (WI-FI)
boards.

Signed-off-by: Michael Carns <mike@carns.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
---
Documentation/hwmon/asus_ec_sensors.rst | 2 ++
drivers/hwmon/asus-ec-sensors.c | 36 +++++++++++++++++++++++++
2 files changed, 38 insertions(+)

diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
index 00d8c46ef9e0..1e40c123db77 100644
--- a/Documentation/hwmon/asus_ec_sensors.rst
+++ b/Documentation/hwmon/asus_ec_sensors.rst
@@ -13,6 +13,8 @@ Supported boards:
* ROG CROSSHAIR VIII FORMULA
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII IMPACT
+ * ROG MAXIMUS XI HERO
+ * ROG MAXIMUS XI HERO (WI-FI)
* ROG STRIX B550-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX X570-E GAMING
diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
index 19d3ca71b360..625c2baa35ec 100644
--- a/drivers/hwmon/asus-ec-sensors.c
+++ b/drivers/hwmon/asus-ec-sensors.c
@@ -141,6 +141,7 @@ enum board_family {
family_unknown,
family_amd_400_series,
family_amd_500_series,
+ family_intel_300_series,
family_intel_600_series
};

@@ -200,6 +201,26 @@ static const struct ec_sensor_info sensors_family_amd_500[] = {
EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
};

+static const struct ec_sensor_info sensors_family_intel_300[] = {
+ [ec_sensor_temp_chipset] =
+ EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
+ [ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
+ [ec_sensor_temp_mb] =
+ EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
+ [ec_sensor_temp_t_sensor] =
+ EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+ [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
+ [ec_sensor_fan_cpu_opt] =
+ EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
+ [ec_sensor_fan_vrm_hs] = EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+ [ec_sensor_fan_water_flow] =
+ EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc),
+ [ec_sensor_temp_water_in] =
+ EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
+ [ec_sensor_temp_water_out] =
+ EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
+};
+
static const struct ec_sensor_info sensors_family_intel_600[] = {
[ec_sensor_temp_t_sensor] =
EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
@@ -281,6 +302,18 @@ static const struct ec_board_info board_info[] = {
.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
.family = family_amd_500_series,
},
+ {
+ .board_names = {
+ "ROG MAXIMUS XI HERO",
+ "ROG MAXIMUS XI HERO (WI-FI)",
+ },
+ .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+ SENSOR_TEMP_T_SENSOR |
+ SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
+ SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW,
+ .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+ .family = family_intel_300_series,
+ },
{
.board_names = {"ROG CROSSHAIR VIII IMPACT"},
.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
@@ -814,6 +847,9 @@ static int __init asus_ec_probe(struct platform_device *pdev)
case family_amd_500_series:
ec_data->sensors_info = sensors_family_amd_500;
break;
+ case family_intel_300_series:
+ ec_data->sensors_info = sensors_family_intel_300;
+ break;
case family_intel_600_series:
ec_data->sensors_info = sensors_family_intel_600;
break;
--
2.35.1
\
 
 \ /
  Last update: 2022-06-28 00:56    [W:0.035 / U:2.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site